The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
101-553 REAR SUSPENSION A ARM PERFORMANCE POLY BUSH KIT
£60.00
Classic Alfa production. Uprated polyurethane bush kit to fit the rear 'A' arm on all 750, 101 and 2600 Series cars with 52mm sized bushes. These bushes have the correct longer centre pin as original and are supplied with 4 metal spacers to prevent any sideways movement - a rubber version of this bush with the correct dimensions has not been available for many years. Rated at 85 Shore for greatly improved rear axle location. As used in Paul Wignall's very successful Giulietta Sprint rally car. Please enquire for availability if you have a very early 750 Series car with the smaller 34mm bushes.
Classic Alfa production. Full set of uprated polyurethane bushes to fit 52mm bush sized trailing arms fitted to most 101 Series cars. Stiffer (85 Shore) than the standard Alfa...
Classic Alfa production. Full set of polyurethane bushes to fit 34mm bush sized trailing arms fitted to most 750 Series cars. The 4 washers supplied are used on the bushes which go in the body /...
Classic Alfa production. Full set of polyurethane bushes to fit 52mm bush sized trailing arms fitted to most 101 Series cars as well as 102 Series 2000 models and 106 series 2600 models. Mildy...
Classic Alfa production. Polyurethane bush kit to fit the rear 'A' arm on all 750, 101 and 2600 Series cars with 52mm sized bushes. These bushes have the correct longer centre pin as original...
Standard bush for the rear joint that connects to the rear axle on the rear suspension trailing arm for all 105/115 series cars. Approx 44mm diameter. See item code SU062 for an uprated version...
Classic Alfa production. Polyurethane bush kit to fit the rear 'A' arm on all 750, 101 and 2600 Series cars with 52mm sized bushes. These bushes have the correct longer centre pin as original and are...
Classic Alfa production. Full set of uprated polyurethane bushes to fit 52mm bush sized trailing arms fitted to most 101 Series cars. Stiffer (85 Shore) than the standard Alfa bush for improved rear...
Classic Alfa production. Full set of polyurethane bushes to fit 34mm bush sized trailing arms fitted to most 750 Series cars. The 4 washers supplied are used on the bushes which go in the body /...
Classic Alfa production. Full set of polyurethane bushes to fit 52mm bush sized trailing arms fitted to most 101 Series cars as well as 102 Series 2000 models and 106 series 2600 models. Mildy...
52mm diameter rear suspension bush to fit the rear 'A-Arm' on all 750 and 101 Series cars, the trailing arms on later 101 Series cars as well as the trailing arms on some 102 Series 2000 and 106...
Rear wheel bearing kit - bearing and oil seal - to suit 1300, 1600 and 1750 cars until approximately 1974. Does not suit the 2000 style limited slip rear axle as that has larger diameter halfshafts...
34mm diameter rear suspension trailing arm bush to suit 750 Series cars. 4 required per car. Also fits the rear suspension of some 102 Series models and some 106 Series 2600 cars and on the rear A...
Horn push button to fit original Momo steering wheel hubs. Limited stocks! NON MILANO Will require the creation of a simple packing ring to make a good interference fit in our steering wheel hub...