105 COUPE PARTS : FUEL

Current Weber production of the legendary 40 DCOE carburettor. - order 2 per car.  You will need to swap the linkages from your old Weber carburettors, to allow them to work inline.  If your old carburettors are a different brand, you will also need to...

Carburettor stay bush - fits into the bottom of the carb support arm where it fits into the engine mounting. Beware cheaper version where the front suspension castor arm bush is used - it doesn't fit inside the engine mount!  

Period rampipes - reproduction of the style used on GTA Corsa cars in period. The trumpets can be set at any angle you wish to alter the ram effect of the air intake. Can be used in conjunction with the filter socks available under item code FL049. This...

Fixing tab rampipe 40 DCOE. 4 required per carburettor. 

Fixing tab rampipe 45 DCOE. 4 required per carburettor. 

Set of 4 Pipercross ram pipes to fit 45mm carburettors. 

Pair of 70mm mesh filters to fit over the Weber 48mm DCOE rampipes. Two pairs required per car.

Plastic profile moulding that fits around the edge of the guard inside the fuel flap to protect it from damage from the fuel filling hose. Often missing on most cars! Use in conjunction with the two small rubber buffers available under code MI016 that...

Pipercross filter socks - set of 4 for those with GTA style intake trumpets fitted or similar rampipes.

Pipercross 40 DCOE rampipes set - 30mm deep, sold as a set of 4 only. Will fit Weber, Dellorto and Solex carbs fitted to 105 series Alfas.

Pair of 56mm mesh filters, to suit rampipes fitted to 40 DCOE carburettors. 

Pair of 63mm mesh filters to suit rampipes fitted to 45 DCOE weber carburettors. Will  fit on the rampipes supplied with new 45 DCOE carburettors. One set per carburettor.

Specially made venturi for our ram pipe FL067. It has a narrower outer diameter to allow the sleeve of the ram pipe to fit. 4 required per car.

Specially made spun aluminium rampipe to suit 40mm DCOE Weber carburettors that sleeve into the carburettor. Has a 63mm diameter bellmouth. Other depths available include 16mm, 39mm, 55mm and 75mm.  You will need FL067/1 venturis for these to fit.

Specially made spun aluminium rampipe to suit 45mm DCOE Weber carburettors. Has a 70mm diameter bellmouth. Other depths available include 16mm, 26mm, 55mm and 75mm. Please enquire in need.

Specially made spun aluminium rampipe to suit 45mm DCOE Weber carburettors. Has a 70mm diameter bellmouth. Other depths available include 16mm, 39mm, 55mm and 75mm. Please enquire in need.

Protection cover for the fuel tank sender. Will fit all 105 Series cars. Please note this is made of black rubber, whereas the original type was made of a dense foam material and had an internal metal spine.

Rubber boot for the fuel filler neck on 2000 GTVs and Berlinas with the smaller diameter fuel tank neck - approx 45mm. For 1300, 1600 & 1750 cars with bigger diameter tank necks, see part number RB017.  

Rubber boot for the fuel filler neck on all 1300, 1600 & 1750 105 Series Coupes and Saloons with filler neck diameter 57mm. See item code RB017/1 for the equivalent part for 2000 models with the smaller filler neck.

Accelerator pedal, to fit all 105 Series cars with hanging pedal cars.  NOT SUITABLE FOR S4 SPIDER 

Accelerator pedal to fit all 105 Series cars plus 750,101, 102 and 106 series models. NOT SUITABLE FOR S4 SPIDER 

Rubber strip to fit between the fuel tank and the surrounding bodywork, in the correct contour. Will fit all 105 cars   

Rubber strip to fit between the fuel tank and the surrounding bodywork.