105 COUPE PARTS : OTHER REAR SUSPENSION PARTS

Here is a diagram showing the location of some of the parts in this category.

Early rear suspension bush kit standard - includes trailing arm bushes of which the front bush being 36mm diameter. For cars from 1964-1967. Kit comprises - T-bar conical bushes, anti roll bar bushes & rubbers and Superflex t-bar end thrust washers.  

Rear suspension bush kit standard - includes trailing arm bushes for cars from 1967 onwards. Kit comprises - T-bar conical bushes, anti roll bar bushes & rubbers and Superflex t-bar end thrust washers. For pre 1967 cars with the smaller front trailing...

Uprated bush kit for the rear suspension on all 105 Series cars from 1967 onwards. Kit includes uprated trailing arm bushes, Superflex t-bar conical bushes and Superflex t-bar end thrust washers. Does not include anti roll bar bushes. For pre 1967 cars...

Aluminium rear spring shim/spacer to fit all 105 Series Saloons, Coupes & Spiders. Used to adjust the rear ride height on cars from the factory. Also available in 11.5mm (code  SU125) and 16.5mm thicknesses ( SU125/1 ). Sold individually, two used per...

Aluminium rear spring shim/spacer to fit all 105 Series Saloons, Coupes & Spiders. Used to adjust the rear ride height on cars from the factory. Available in 11.5mm (code  SU125) and 16.5mm thicknesses. Sold individually, two used per car - sitting up on...

Rear spring shim/spacer to fit all 105 Series Saloons, Coupes & Spiders. Used to adjust the rear ride height on cars from the factory. Available in 11.5mm and 16.5mm (code SU125/1) thicknesses. Sold individually, two used per car - sitting up on the top...

Rubber seat for the top of the rear spring on all 105 Series cars. Two used per car.

Metal seat that sits on the top of each rear suspension spring on all 105 series Spiders, Coupes, Saloons and Montreals. 2 required per car.

Short (40mm) rear bump stop fixing screw to suit 105 Series cars, typically used on early 105 GT models. 2x used per side. Please check the length before ordering. See also SU095 (50mm) and SU095/1 (80mm).

Extra long rear bump stop fixing screw (80mm) to suit 105 Series cars where thicker bump stop spacers are used. Please check the length you need. These have an allen key style head to make fitting and removal easier. Please check the length you need. 2x...

Rebound straps mounting plate. 105 Series cars. 

Rear bump stop spacer. 105 Series cars. 

Rear axle bump stop to suit early 105 Series cars 1963-66 (usually the cars which were fitted with Dunlop brakes). Two required per car. These are much larger (12cm high) than the later style. Rebound straps are available under part number SU075/2 and...

Rear bump stop fixing screw to suit all 105 Series cars.These have an allen key style head to make fitting and removal easier. (50mm in length) 2x used per side. Please check the length before ordering. See also SU095/2 (40mm) and SU095/1 (80mm)...

Mounting plate for the rear suspension bump stop on all 105 Series cars. One each side, two required per car. See item code SU095 for the replacement mounting bolts to match as well.

Rear axle bump stop to suit all 105 Series cars. Two required per car. These fit all cars, however the early cars with Dunlop brakes originally used a larger version which we now sell under part number SU073. Also available are mounting plates for the...

Re-bound strap fitting kit consisting of four metals plates and nuts and bolts to join the straps together. Straps available separately under item code SU075.

Set of 4 rear suspension rebound straps (inner and outer for each side) to suit all 105 series Saloons, Coupes and Spiders as well as Montreals. Also available is a fitting kit of metal plates under item code SU076.  

Rear suspension rebound straps in the original canvas style. This version is a single strap as fitted to 105 Series cars up to 1967. See item code SU075/1 for the original style straps for post 1967 cars or item code SU075 for an alternative version of...

Set of 4 rebound straps to suit all 105 Series cars 1967 onwards. These are in the original canvas style. See item code SU075/2 for the version to fit pre '67 cars. Also see item code SU075 for an alternative version of the straps set.

Rear suspension trailing arm nut and bolt kit to fit all 105 Series cars.

Rear suspension trailing arm to fit all 105 Series cars 1967 onwards.

Standard bush for the front joint of the rear suspension trailing arm (trailing arm to body joint) on all 1968 on 105/115 Series cars. Approx 50mm diameter. For earlier (pre 1968) cars with smaller front bushes, see item code SU065. A heavy duty version...