105 SPIDER PARTS : OTHER COOLING PARTS

Heater facia panel to fit Roundtail Spiders.

Radiator fan retaining washer, suitable for fitting WA039 WA040 Thickness – 2mm Inner diameter – 36mm Outer diameter – 67.3mm Mounting hole diameter – 7mm PCD – 51mm

Coolant temperature sensor for Bosch Motronic/ L-Jetronic. This sensor serves the ECU not gauge or warning light

Later style heater valve that attaches direct to the heater matrix. Suitable for cars from about 1968 onwards (including Montreal), depending upon when the model changed over. This style valve has been available for many years in plastic but has now been...

Radiator fan switch for s4 spider and various 116 and 75 models that have electric cooling fans. Screws into rad. Can also be fitted in the top of the head at the back to run an electric fan in earlier carb-fed engines.   Will also fit Montreal. 

Earlier style metal bodied heater valve, to suit the earlier heater unit as found in Roundtail Spiders, Sprint GT & GTVs and Giulia Saloons up to about 1968. Also fits 101 Series cars and 102 Series 2000 Touring bodied Spiders. The later style valve that...

Rubber diaphragm to enable you to repair the heater valve on your 101 Series, 102 Series 2000 Touring Spider or early 105 Series cars,  f i t t e d with the metal heater valve a s s h o w n u n d e r i t e m c o d e W A 0 1 9 .

Small rubber gasket/seal to suit the later style heater valve (part number WA020) where it attaches direct to the heater matrix.

Heater matrix/core to suit earlier style heaters fitted to 105 series cars up to 1968. Approx 6 cm/2.5 inches thick on the sides with a 32mm thick core. Note that the changeover year is only approximate as the heater design changed at different times for...

Hose for heater valve to matrix, for early heater boxes. Please note it will require cutting to size.   

Heater matrix/core to suit all later style heaters from about 1968 onwards. See WA058/1 for (thicker) maxtrix for earlier style heaters. Note that the changeover year is only approximate as the heater design changed at different...

Heater motor with fan a 15.3cm diameter fan amd a base fitting of 85mm (see photo) to generally suit the later style heater unit found on Spiders from about 1970 onwards.  Note that different models changed heater units at different times. Spider...

Heater motor with fan to generally suit the later style heater unit found on 1750/2000 GTVs & GT Juniors and Giulia saloons from about 1968 onwards.  Note that different models changed heater units at different times. Spider generally use WA021/2 but you...

Heater motor with fan. Approx.16.5cm diameter fan and a base fitting measuring 85mm (see photo). To fit the earlier style heater unit (pre 1968) found on Sprint GT/GTVs and 1600 Roundtail Spiders. Also used on early Giulia saloons 1963-67.

Early heater slider control knobs. Fits all 105 models with early heater 1962-68.

Reproduction of the 'chromed' heater slide panel originally fitted to 1750 2000 GTVs, late GT Juniors, Berlinas and some Giulia saloons. This version is manufactured in plated aluminium. A version produced in the original 'chromed plastic' is also...

Now back in stock - Heater fascia panel to fit 1750 & 2000 GTV and Berlinas and late GT Juniors with centre consoles. Now reproduced in chromed plastic as original. Version in polished aluminium also available - see code WA024/1...

Heater facia panel - black 2 piece for Spiders 1970-84 with centre console and some USA GTV. Made in plastic, exactly like original.

Heater control slider knob - chromed plastic. As originally fitted to Series 1 1750 GTVs, early GT Juniors and 1750 Berlinas, but will fit any heater slider control.

Heater slider control knob - black plastic as used in most 105 and 115 series cars.

A. Salamini & Co. radiator sticker,  measuring 52mm X 21mm ( at centre )