105 SPIDER PARTS : OTHER REAR SUSPENSION PARTS

Rear anti-roll bar rubber to suit standard sized rear bars. Two required per car.

Top quality (Würth brand) Nylock nut to fit the 4 bolts that attach the front suspension spring pan to the wishbone, as well as each track rod end and the 4 bolts on the rear axle shafts that bolt up the wheel bearing housing on each side.

Bump stop for the differential case all 105 & 115 cars

Rear wheel bearing kit - bearing and oil seal - to suit 1300, 1600 and 1750 cars until approximately 1974. Does not suit the 2000 style limited slip rear axle as that has larger diameter halfshafts. See item code SU023/1 for the equivalent part for the...

OE quality rear wheel bearing kit - bearing, seal and shrink ring - to suit all limited slip axles (found in all 2000 cars) from 1972 onwards and all 1600 cars from 1975 onwards. One kit does one side of the axle, two required per car.  Note that the...

Rear wheel bearing kit - bearing, seal and shrink ring - to suit all limited slip axles (found in all 2000 cars) from 1972 onwards, as well as all 1600 cars from 1975 onwards. One kit does one side of the axle, two required per car. See item code SU023...

Rear halfshaft tab washer for 1300, 1600 & 1750, non LSD 105 cars.

Rear half-shaft oil seal to suit 2000 limited slip rear axles with the larger diameter half-shafts used from 1972 onwards and all rear axles from about 1975 on (including non LSD axles). Also fits Montreal.

Rear half-shaft oil seal to suit 1300, 1600 & 1750 rear axles with the smaller diameter half-shafts used to approximately 1974. See item code SU026 for the equivalent seal for the larger style limited slip differentials used on 2000cc cars from 1972 and...