106-2600 PARTS : BRAKES

2600 rear brake caliper rebuild kit. This kit contains all the rubber parts required to rebuild two rear brake calipers on any 2600.

2600 front brake caliper rebuild kit. This kit contains all the rubber parts required to rebuild two front Girling brake calipers on any 2600.

Brake vacuum servo overhaul kit to fit the Girling brake servo unit on 106 Series 2600 cars. Also fits some Maserati models from 1960's for example 3500.

Bleed screw cap. Will fit all bleed screws.  

Brake disc/drum retaining screw.

2600 Short rear handbrake cable.

Spring for brake pedal, to ft in the pedal box. Suitable for 750 & 101 cars. 

Repair kit to suit a 1 inch diameter Girling Brake Master cylinder as fitted to all 750 Series and early 101 Series (drum braked) cars as well as 1900 models, 102 Series 2000 cars and drum braked 106 Series 2600. Contains the rubber seals and dust boot.

1" brake master cylinder to suit all 750 Series and 101 Series cars with front drum brakes. Please note – This cylinder was made for Giulietta 750/101 cars which use a union connection. To use this master cylinder on cars with a banjo connection (1900,...

FISPA oil filter decal  for 750 Series, 101 Series, 102 Series (2000) Series cars. 

Mounting bracket to fit the single brake fluid reservoir on 750 and 101 Series cars, which is also used as a clutch fluid reservoir on some 106 Series 2600 cars.

Complete brake fluid reservoir to suit all 750 & 101 Series cars, as well as 106 Series 2600 cars and possibly 102 Series 2000 cars as well. New production with rubber seal in cap and a better price! Mounting bracket also available - see code 750-299/1...

Yellow AGIP/SHELL decal to suit the brake fluid reservoir on later 750 Series, 101 Series, 102 Series (2000) and 106 (2600) series cars.  See code 750-299 for reservoirs to match and 750-298/1 for the Girling Decal to go onto earlier 750 Series cars.  

Brake union 5 way to suit all 105 series cars with standing pedals. This is normally fitted on the Bulkhead/Firewall in the engine bay.

BOSCH Brake light switch with spade style connector terminals to suit all RHD 105 series cars and LHD 105 series cars with standing pedals. Will also fit 750 & 101 Series cars as well as some 1900, 102 Series 2000 and 106 Series 2600 cars as well.

Brake light switch with spade style connector terminals to suit all RHD 105 series cars and LHD 105 series cars with standing pedals. Will also fit 750 101 Series cars as well as some 1900, 102 Series 2000 and 106 Series 2600 cars as well.

Short handbrake cable section from centre of rear axle to the side. To fit 750 & 101 Series cars. Also fits 2600.

Handbrake lever spring. Suitable for 1900/750/101/102/106 series cars. 

Main handbrake cable to fit 2600 & 2000 Touring Spider 

Bonaldi servo sticker. Green & white, measuring 56mm X 19mm 

Fantastic tool for straightening new brake lines to fit onto all Alfas - as well as other lesser marques. Allows you to create dead straight pipe runs for a factory finish look. For 3/16" pipe. Other versions available to order. To see how it works -...

Useful tool for bending new brake lines to fit onto all Alfas - as well as other lesser marques.  

Brembo DOT 4 brake and clutch hydraulic fluid. 0.5 (500ml) litre container.

Brembo DOT 4 brake and clutch hydraulic fluid. 1 litre container.