116 ALFETTA PARTS : FUEL

Thackery washer, carburettor mounting. 5/16 - M8 fitting. 

Gasket for the fuel pump mounted on the lower front timing cover on carburettored 101 Normale and 105 Series cars plus 116 and 75 models with carbs.. There should be two gaskets fitted - one either side of the plastic insulating spacer block (available...

Aluminium blanking plate to seal off the mechanical fuel pump mounting on carb equipped 101, 105, 116 and 75 models. This is used when fitting an electric fuel pump to the car.    

Plastic mounting spacer to suit mechanical fuel pumps mounted down on the front timing cover of the engine. Fitted to most carburettor equipped 101, 105, 116 and 75 models.

Useful in-line universal fuel filter that can serve as additional fuel filtration or as a cheap replacement for the original filter unit. Suitable for all carburettor-equipped models.

Bosch in-line fuel filter to suit fuel injected Spiders 1987-93 and fuel injected 116 and 75 models, including V6.  

Inlet carburettor gasket found on Series 4 1600 Spiders and also some late S3 Spiders and Alfettas. Four required per car. 80mm hole spacing. You will also need four FL021. If you require the carburettor supports please see FL096 & FL097 Inlet...

40mm Carburettor twin rubber centre mount used on Series 4, 1600 Spiders and found on some late S3 Spiders. If you require the outer single support please see FL096 S4 1.6 CARBURETTOR RUBBER MOUNT - 40mm ALSO LATE 116 & 75 Paper gaskets are...

40mm Carburettor rubber mount used on Series 4 1600 Spiders and found on some late S3 Spiders. If you require the centre double support please see FL097 S4 1.6 CENTRE CARBURETTOR RUBBER MOUNT - 40mm Paper gaskets are available under code FL021...

Carburettor rubber mount to suit 40mm Weber, Dellorto and Solex carburettors. Used on all 105 series GT/GTV, Saloons and Spiders, early 116 4 cylinder as well as 101 Series Veloce cars. Normally 4 required per car. Paper gaskets for each side of...

Inlet manifold gasket to suit Bosch fuel injected Spiders from 1988-93 plus some fuel injected 116 and 75 models (not TS or V6).

45mm paper carburettor gasket. Note, unmodified cars will use the 40mm gasket instead (FL021).

40mm paper carburettor mount gasket to fit 40mm Weber, Solex and Dellorto carburettor mounts. 2 required per rubber mount/carburettor throat. 72mm hole spacing. Note, some 1600 S3/S4 Spiders (and some late Alfettas) use a gasket with 80mm hole spacings...

Gasket to fit between the air intake trough/plenum and the carburettor body on all carburettored 105, 116 and 75 engines (not TS or V6).

Rubber gasket filter for aluminium trough to tubular air filter canister ('68-'78)

Fuel hose (8mm internal diameter) to suit all carburetted cars. Priced per metre (100 cm).

A cheaper alternative to the original BOSCH fuel pump that we sell under FL028.  External fuel pump to suit Bosch fuel injected Spiders, GTV6 and 75.  Note that there is also a lift pump located inside the fuel tank which is available under item code...

BOSCH External fuel pump to suit Bosch fuel injected Spiders, GTV6 and 75.  Note that there is also a lift pump located inside the fuel tank which is available under item code FL028/1. Not suitable for the 1.8 Turbo 75

Fuel filter element small - Fispa type fits in small glass bowl as used on most Alfas from late 1950s until 1975. Includes spring. 4 cm long/tall and 3.3 cm diameter. For the seal between glass bowl and unit order FL078.

Filter king fuel filter rubber seal. 

Filter king fuel filter & regulator with glass bowl

Ball joint, for the throttle linkage, works in conjunction with FL052/1.

Bush for the throttle linkage mechanism where it pivots on the firewall/bulkhead. Two required per car.

Facet Silver Top low pressure electric fuel pump designed for use with carburettors. This latest variant now has solid state technology to provide superior reliability over the older points triggered types. The Interrupter fuel pumps can be fitted...