CL004/1 CLUTCH SLAVE CYLINDER - ORIGINAL BENDITALIA BRAND

Clutch slave cylinder to fit all 105/115 Series cars 1968 onwards plus V6 models (only) of the 116 and 75.

Clutch master cylinder to fit all 105 Series cars with standing pedals - all hydraulic clutch right hand drive cars 1968-78 and left hand drive cars from 1968 to 1970. 19mm bore. Not suitable...

Clutch master cylinder repair kit to fit Bonaldi master cylinders fitted to all 105 Series cars with standing pedals (LHD cars to about 1970 and all RHD cars). Will not fit ATE cylinders.

Original equipment Sachs 3 piece hydraulic clutch kit (pressure plate, friction plate and release bearing) - to fit all 105 Series cars 1968-1993 (excluding Montreals) ...

ATE Clutch master cylinder with reservoir to fit all left hand drive 105 Series cars with hanging pedals 1970-93, including Montreals, internal diameter 17.5mm if you require the...

Clutch master cylinder to fit all left hand drive 105 Series cars with hanging pedals 1970-93, including Montreals. Reservoir available separately - see code CL002 if you require the...

Clutch master cylinder repair kit to fit all left hand drive cars with hanging pedals, including some Montreals. Please check your old cylinder before ordering - if your master cylinder has 3 seals...

Clutch slave cylinder retaining circlip - two fitted per car.

LUK 3 piece hydraulic clutch kit (pressure plate, friction plate and release bearing) to fit all 105 Series cars from 1968 onwards (excluding Montreals) and all Spiders from 1968-1993. ...

Here is a diagram showing the location of some of the parts in this category.