Clutch cable to fit all right hand drive 105 Series cars with mechanical operated clutches.
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
Rubber firewall grommet for left hand drive cars that takes the heater hose and speedometer cable and hand throttle cable on later cars. Fits left hand drive cars up to mid 1970s.
Right hand drive pedal base seal - for all rhd cars from 1964 to 1978. To properly fit the boot, the pedal box must be removed from the car and the pedal shafts removed from the pivot. The boot is...
New clutch cable for left hand drive cars with mechanically operated clutches.
Speedometer cable for all right hand drive 105 series cars. 2.0m long, it will also fit 750 & 101 series cars in need. For a suitable cable for left hand drive cars, see EN087.
Rev/tacho cable for left hand drive 105 series cars. 1.55m long, it will also suit some 750 & 101 series cars as well. For LHD speedo cable, see part number EN087/1.
New clutch cable for left hand drive cars with mechanically operated clutches.
Clutch master cylinder to fit all 105 Series cars with standing pedals - all hydraulic clutch right hand drive cars 1968-78 and left hand drive cars from 1968 to 1970 Not suitable for cars with...
Rubber gaiter that fits over the clutch actuating arm where it enters the gearbox bell housing on all mechanical clutch cars.
Here is a diagram showing the location of some of the parts in this category.
Original Fitchel Sachs mechanical clutch pressure plate to suit 750, 101 and early 105 series cars. Use in conjunction with the friction plate available under item code CL015 and the release...
Replacement mechanical clutch friction plate to suit 750, 101 and early 105 series cars. Use in conjunction with the pressure plate available under CL016 and the release bearing and retaining clips...
Genuine Fitchel & Sachs mechanical/cable clutch release bearing to suit clutches on 750, 101 and early 105 series cars. WHEN ORDERING - PLEASE ALSO ORDER 2 x CL013/1 RETAINING CLIPS TO...
Clutch slave cylinder - original equipment Benditalia brand - to fit all 105/115 Series cars 1968 onwards.
Clutch release Bearing Adapter for 750/101 105 Cars. This adapter is designed to allow the use of a 1750/2000 engine and clutch in a 750, 101 and 105 models with a mechanical clutch. The car...
Clutch master cylinder repair kit to fit Bonaldi master cylinders fitted to all 105 Series cars with standing pedals (LHD cars to about 1970 and all RHD cars). Will not fit ATE cylinders.