CLEARANCE

7x15" GTA wheel suitable for 105 GT & Spider cars. This wheel has a German TUV certification so suitable for all European markets. ET29 Weight - 7.50kg. Comes complete with centre badge. This wheel is brand new. We believe it may have...

High tension spark plug lead set to suit earlier 105 cars (1964-67) and all Giuliettas 750 & 101 (1955-1963) with the ignition coil mounted near the distributor in the engine bay. Produced in original style green colour thin wire ( 5mm ). This...

Brake fluid reservoir for left hand drive 105 series cars from 1970 with hanging pedals. Also fits some 116 models. 3 cap version. Also suitable for LHD Montreals. This reservoir is brand new. It is just missing one of the caps. As can be seen in...

Pair of polyurethane front anti-roll bar droplink bushes to suit early 105 series cars. These bushes are brand new. They are just not a production we usually sell.

Alfa 8C watch. This watch is not of the highest quality and requires a new battery.

Early style voltage regulator (Bosch) to suit all 105 series cars with dynamos/generators as well as 101 series cars as well. This regulator is brand new. It has just been slightly scratched up on delivery to us.

Pair of rubber seals that fit between the top of the front wings and the scuttle panel on Spiders. Originally fitted to later Series 3 and 4 Spiders, but can be fitted to any Series 2 car as well. These seals are brand new. They are just an old,...

Front quarterlight / quarter window rubber seal to fit all 105 series GT, GTV, GTA & GTC cars - right hand side. This seal is brand new, it is just an old production that we no longer stock.

Right hand, bayonet/blade style wiper arm to fit all non step front GTs as well as Giulia Supers and Berlinas. Note, that if you are replacing an original style arm with the grey cap over the mounting nut, you will need a WI012 nut to fit this to...

Separate indicator repeater lights to suit all Step-front GTs. Also suits Giulia saloons which use the same repeator without the surrounding 'chrome' piece, which is available separately. This light unit is brand new, however it has some...

Complete reproduction tail light unit to suit Spiders 1970-83. Right hand side as viewed from the rear of the car. Includes wiring and 'tube nuts' for mounting. Does not include gasket/seal available separately as a pair under code LT091. This unit...

Plastic "Spider" script for rear of Series 4 Spider 1990-93. Requires adhesive to fit. We recommend a decent automotive double sided tape, or specialist adhesive film to affix the badge to the car. This badge has broken into two parts, this would...

GT front screen insert - nicely made anodised aluminium extruded section that fits into the screen rubber. This pair is brand new, however there are some minor ripples to the extrusion, so some work may be needed to straighten these out for a perfect...

GT front right screen insert - nicely made anodised aluminium extruded section that fits into the screen rubber. This insert is brand new, we just usually sell them in match pairs. The finish on this part is also more matte than the usual shinier...

GT rear right screen insert - nicely made anodised aluminium extruded section that fits into the screen rubber. This insert is brand new, we just usually sell them in matched pairs.

Right section for the spoiler/air dam found on Series 3 Spiders from 1985-89. This panel is brand new, it is just an old production we used to sell.

Left section for the spoiler/air dam found on Series 3 Spiders from 1985-89. This panel is brand new, it is just an old production we used to sell.

New centre grille 'heart' to suit all Step-front GTs. 7 bar style as fitted to cars from Sprint GTV onwards, but will also fit Sprint GT models. New production - great fit. This unit is brand new, it just has a small manufacturing flaw, being a...

New fuel tank to fit all 105 Series Coupes except 2000 GTV from 1964-77 - with correct neck (23 cm long, 58mm diameter). This tank is brand new. It has been fitted and removed from a car so has some fitting marks and received some...

Front anti-roll bar mounting polyurethane bushes (18mm diameter) to suit early Alfetta GTVs. These are the earlier style mounting bushes that have the flanges on the flat side of the bush. These bushes are brand new. They are just not a size we usually...

Pair of outer door handles to suit all 750 & 101 Series cars - as well as some Ferrari & Lancia models as well. These handles are brand new. The left handle is just missing the key and lock barrel as can be seen in the photos.

105.49 body type plate to fit a 1750 Berlina Gd e CKD (RHD South African Berlinas). This plate is brand new. It is just not one we usually sell.

SuperFlex front anti-roll bar mounting polyurethane bushes (22mm diameter) to suit early Alfetta GTVs. These are the earlier style mounting bushes that have the flanges on the flat side of the bush. These bushes are brand new, they are just not a size...

Stiffer road springs. (Please note these are not lowering springs, the springs are shorter but much stiffer, the vehicle height will remain the same). to suit all 750 & 101 Series cars. These springs are usually part of our fast road...