GB018/1 FRONT GEARBOX OIL SEAL - CORTECO - HYDRAULIC CLUTCH CARS

Front gearbox to bellhousing oil seal - to fit cars with hydraulic clutches.

OE quality Corteco brand rear gearbox oil seal to fit all 105 Series gearboxes as well as all 5 speed 101 and 106 Series gearboxes.

Front gearbox to bell housing oil seal, to use a late hyradlic gearbox with an early cable clutch bell housing.

Replacement rear gearbx oil seal to suit all 105 series gearboxes, both mechanical/cable and hydraulic clutch cars, as well as 101 and 106 series gearboxes.

New production from the original manufacturer of top quality gearbox synchro rings to fit later 105 Series gearboxes, as well as later Alfetta and 75 based cars - including V6 versions. The best...

Protective large rubber washer/spacer for the rear gearbox mount on all 105 series cars. Sits either side of the rear metalastic mount inside the gearbox crossmember. 2 washers required per car.

Reproduction rubber combination gearbox gaiter to suit 105 series cars from late 1960s onwards. Two part gaiter, with the inner section that attaches to the 'tower' at the rear of the...

Reproduction synchromesh ring to fit later 105 Series gearboxes.

Small rubber gearbox seal. sits under the gear lever and on top of the metal plates on the rear 'tower' of the gearbox. Use in conjunction with the small washer available under code GB039/1.

Front gearbox to bell housing oil seal to suit mechanical clutch 750/101/105 cars and all 2600 (which are hydraulic clutch). NOT suitable for early "split case" 750 gearbox.