JUNIOR ZAGATO PARTS : FILTERS

Blanking plate for use where you are using a GTA oil cap and therefore do not need the standard breather elbow.

Gasket for the joint between the cam cover and breather elbow on 105 and some 116 models.

Oil filter - early cartridge style as used on 750/101/102 and 105 series 1300, 1600 & 1750 engines up to about 1972. This filter comes complete with two rubber O-ring, one approximately 90mm-92mm (O/D) and the other 76.00mm ID x 84.00mm OD...

Spin-on style oil filter to suit 105 series engines from about 1972 onwards plus all 116 and 75 models. High quality, direct alternative for original sized Alfa oil filters made by the O/E manufacturer for Ferrari (UFI) or BOSCH filter. Also fits...

Spin-on style oil filter to suit 105-series engines from 1972 onwards plus all 116 and 75, including V6. Original branded filter now produced in a smaller size to suit more modern engine bays with restricted space/access. Good for Series 4 Spiders where...

Fits our battery clamp set and also the air filter housing of 105 series cars with the long air filter on the carb side.  

Gasket to fit between the air intake trough/plenum and the carburettor body on all carburettored 105, 116 and 75 engines (not TS or V6).

Rubber gasket filter for aluminium trough to tubular air filter canister ('68-'78)

Fuel filter element - larger size, fits into the metal housing found on some later carburetted cars (1975 to 1986) as well as the Filter King fuel filter unit available under code FL053. Size 4cm tall/long by 4 cm diameter.

Fuel filter element small - Fispa type fits in small glass bowl as used on most Alfas from late 1950s until 1975. Includes spring. 4 cm long/tall and 3.3 cm diameter. For the seal between glass bowl and unit order FL078.

Filter king fuel filter rubber seal. 

Filter king fuel filter & regulator with glass bowl

Support bracket for the early style 'crossover' plenum. Please see pictures 

Curved oil breather hose from the cam cover to the air filter canister on many of the 105 and 116 series cars. Note that this fits both the early style 'crossover' air-cleaner setups as well as the later tubular style air-cleaners.

Metal strap to fit the tubular air filter canister fitted to 105 Series cars from about 1970 to 1986 plus some 116 models.

Cylindrical Air filter - later type (105.48) - length 41cm x 12 cm diameter to suit later 105s with the filter on the carb side plus some 116 models. Please check measurements before ordering!

Period rampipes - reproduction of the style used on GTA Corsa cars in period. The trumpets can be set at any angle you wish to alter the ram effect of the air intake. Can be used in conjunction with the filter socks available under item code FL049. This...

Fixing tab rampipe 40 DCOE. 4 required per carburettor. 

Fixing tab rampipe 45 DCOE. 4 required per carburettor. 

Pipercross filter socks - set of 4 for those with GTA style intake trumpets fitted or similar rampipes.

Pipercross 40 DCOE rampipes set - 30mm deep, sold as a set of 4 only. Will fit Weber, Dellorto and Solex carbs fitted to 105 series Alfas.

Pair of Pipercross kk300 air filters - inc. mounting plates. No rampipes necessary. Please note, the backplate may need some easy trimming to make it fit some engines.

Pipercross kk600 air filter - including mounting plate. Fixes directly over both carbs. Greatly improved induction, can be teamed with rampipes available under code FL045 for best effect.  Note that this is not suitable for 1300 engines in 105 Series...

Pair of K+N 'pancake style' performance air filters to suit all sidedraught twin carburettor Alfas. Chrome plated bodies and long-life filter elements and all fittings included. Not suitable for 1300 engines.