SH101 USED CAMSHAFTS

We have a stock of secondhand engine cam covers to suit late 105 Series cars (with the air filter on the carburettor side. Prices are as follows: Cleaned and vapour blasted £90.00 exchange.  Early...

Reproduction standard camshaft as found in European specification 1750 & 2000 105 and 116 engines. Also works well as an inlet camshaft on mildly tuned 1600 engines. Sold individually. 10.1mm lift,...

Used exhaust manifold for cylinders 2+3 on 1600/1750/2000 carburettor cars. We have both versions with and without the nuts that you can remove for tuning probes (see photos)

Colombo & Bariani have been manufacturing both original equipment and performance camshafts for cars and motorcycles over 60 years. This 10.9mm lift camshaft is excellent for fast road...

Used centre console to suit 2000 GTV's, this console is in good condition for its age but is missing the switch support as can be seen in the photos.

10.8mm lift hollow billet lightweight camshaft with 285 degrees duration at 0.30mm tappet clearance (254 deg. at 1mm lift). Designed by leading UK Alfa competition engine builder Jim Evans, whose...

Colombo & Bariani have been manufacturing both original equipment and performance camshafts for cars and motorcycles over 60 years.  These 10.9mm lift camshafts are excellent for fast road 1300/1600...

Used set of 4 steel wheels 5.5x15 inches. These wheels have been painted a lovely gloss white, there is some minor chipping to the edges as can be seen in the photos. These wheels come with the...

Used centre console to suit a 2000 GTV, this console is in good condition other than it missing the support panel for the switches as can be seen in the photos.

Very rare used crankshaft from a 1600cc 105 series engine. Big end and main bearing journals are currently at 020 so it has plenty of scope for a re-grind, presumably to 030. Some rust on the bearing...