WA043 Fan belt - 1300 alternator

Fan belt to fit 105 Series cars with alternators. Also fits 2600 models with dynamos/generators. 825mm length.

Fan belt to fit 101 and 105 Series cars fitted with a dynamo/generator. 725mm length.

Cylindrical Air filter - later type (105.48) - length 41cm x 12 cm diameter to suit later GTs GTVs, Kammtail Spiders and Saloons from about 1970 onwards.

Fuel filter element small - Fispa type fits in small glass bowl as used on most Alfas from late 1950s until 1975. Includes spring. 4 cm long/tall and 3.3 cm diameter. For the seal between glass bowl...

Late style tubular air filter, as normally fitted to carburettored S3 Spiders - 35cm long and 12cm diameter tapering to 11cm.

Here is a diagram showing the location of some of the parts in this category.

High tension spark plug lead set. With long king lead to suit cars with the coil located on the bulkhead. 7mm wire. Not silicone, if silicone is required, see IG003/1

Bypass hose to suit all 3 outlet waterpump cars from about 1970 through to 1987. Goes from the water pump to the bottom of the inlet manifold underneath the thermostat housing.

High tension spark plug lead set in green. To suit earlier cars with the shorter coil lead for cars with the coil mounted near the distributor, with a 7mm wire.

Spark plug - NGK B7ES - our recommendation for spark plugs for all 750,101,105 series and Montreal engines.