The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
ATE brake cylinder paste is used for repair, assembly and conservation of hydraulic brake components, It is applied thinly and evenly to cylinder sleeves, pistons and seals. (Assembly of Brake calipers, Master cylinder etc). - ATE brake cylinder paste is compatible with DOT 3, DOT 4 and DOT 5.1 brake fluids.A - ATE brake cylinder paste is supplied in a 180g tubes.
Brake master cylinder repair kit to suit left hand drive ATE 20mm master cylinders, usually found on early (1970-72) left hand drive hanging pedals 105 series cars inc. Montreals. For more...
Short front brake pipe from the flexible line to the brake caliper on ATE braked cars from 1968-93 with large front calipers (1750+2000 models) including Montreals. Please specify if you require...
Brake master cylinder 22mm - for all LHD 105 series cars with hanging pedals 1970 onwards and RHD Spiders from 1984-93. Also fits post 1973 Montreals - LHD and RHD. Also fits many 116 and 75...
BREMBO Brake master cylinder 22mm - for all LHD cars with hanging pedals, 1970 onwards and RHD Spiders from 1984-93. Also fits post 1973 Montreals - LHD and RHD and all Alfetta transaxle cars (116...
Give Your brakes the highest possible guarantee with the NEW Brembo B-Quiet lubricant. B-Quiet is a new Brembo lubricant which provides long term high load capacity and reliability for your braking...
Full set of Brembo brake discs, new calipers (no exchange required), pad pin set, Ferodo pads and all 3 flexi hoses. Front discs include new wheel studs. We normally stock Brembo brake discs but kits...
Authentic original, Alfa Romeo service/invoice folders, these are the genuine folders that you used to receive from the dealership after your car was bought, parts were bought or you had a service...
Mounting plate for the rear suspension bump stop on all 105 Series cars. One each side, two required per car. See item code SU095 for the replacement mounting bolts to match as well.
Rebuild kit for both front ATE brake calipers, including new pistons and seals. With a piston diameter of 48mm this kit will suit both 1300/1600 (smaller) and 1750/2000 (large) ATE front calipers...
Radiator top hose with large diameter end to suit all cars with inlet manifolds fitted with screw-in thermostats. See part WA009 for later cars with thermostats mounted in housings on the inlet...
Fully electronic distibutor by 123 Ignition with no points, electronic ignition & 16 position switchable advance curve, fits all 750/101 & 105 cars plus early 116 models which have points ignition...