Categories

New, reproduction small front brake caliper left side (ATE fitment) - to fit 1300/1600 105 series cars plus some 116 models of any engine size. No exchange necessary. We may still buy your old core unit if you are in the UK. Please email us for further...

Pair of glovebox lid hinges for all cars with a painted metal dashboard 1966-83 (all roundtails and 1300/1600 Kamm-tails). Classic Alfa production - made in the UK. Improved, stronger material than original. OE part numbers - 105.03.63.200.00/01 and...

Classic Alfa production - made in the UK. These small pads sit at the back of the seat base and the adjuster rests on them. Due to the load on them and the original material becoming brittle with age they are nearly always broken or missing completely...

Gasket for the water pump fitted to 750 and 101 Series 1300 engines. Use in conjuction with the water pump overhaul kit available under code 750-026.

Short vertical throttle rod that fits between the carburettors on some Left Hand Drive 1750 and 2000 model 105 Series cars - and possibly some other versions too. Includes metal ends and spring retaining clips. Ball joint centre to centre distance...

Chromed/polished metal lockable boot/trunk release handle with matching keys to fit all 105 Series GT/GTVs & Spiders up to 1972.

Matched pair of dash top vents (left and right, sinistra & destro) to fit all 1750 & 2000 Berlina saloons, Giulia saloons and Spiders 1970 to 1985 and all GT/GTVs from the 1750 GTV Mk 1 onwards with the later style dash tops...

Right side sun visor to fit Spiders 1966-89, including vanity mirror and mounting brackets. Suitable only for left hand drive cars due to the mirror.

Bootlid/truck seal to fit all 750 and 101 Series Sprint Speciales.

Metal strap to hold the radiator expansion tank to the inner wing on all 105 Series cars with a radiator expansion tank/overflow bottle. New tanks are also available under code WA042. ** Please note, if you have a RHD car this strap will need to be...

Angled plate that fits either side of the propshaft centre support bearing on all 101 Giulia and 105 Series cars, including Montreals. Two per car.

Internal gear bush for 1st to 4th gear on all 101/105 Series gearboxes. Also fits late 102 series and all 2600 (106 series). Outer Diameter - 36.5mm Inner Diameter - 34.8mm Depth - 28.8mm

Helix Autosport clutch friction plate to fit hydraulic clutch cars 1968-93. This version is suitable for fast road/trackday use and can be combined with the standard F&S clutch kit CL008 or LUK version CL007.

Metal housing for the bush attached to the outer end of the rear suspension T-bar. Two required per car. The actual bush is available separately under item code SU070 and thrust washers under code SU071.

Metalastic bush for each end of the rear suspension T-bar where it attaches to the body frame. Two bushes required per car. New housings for the bush are also available under code SU070/1. Thrust washers also available under code SU071

Classic Alfa Romeo grille badge - polished with a red background. Generally found on 6C 2500s as well as some 1900 models. 55mm diameter with two mountings on the rear.

Boot lid (trunk) seal to suit all 750 and 101 Series Spiders.  

Rubber seal for the chrome boot / trunk lock on all 750 & 101 Series Sprints.

Complete bootlid seal for all 750 & 101 Series Sprints

Upper door hinge spring to suit all 750 & 101 Series Spiders

Dash vent to suit Series 2 Spiders 1970-82 and possibly early Series 3 cars as well. Will also fit Roundtail Spiders, but a slightly different design to original. Outside Diameter: 79mm Inner Diameter (where the vent slots down into the dash): 72mm

Bonnet/hood release cable to suit all Spiders 1986 onwards.

Bonnet/hood release cable to suit all Coupes 1964-76, Junior Zagato and all Spiders to 1986.  

Re-release from Pirelli of the correct metric sized Cinturato tyre as fitted to 2000 and 2600 Alfas in the 1960s.  If you want to keep the original style and appearance of the tyres on your car, but take advantage of modern tyre compounds and...