Categories

Set of 6 flame polished scratch-resistant 4mm thick extra lightweight Lexan polycarbonate side windows to suit all Bertone GTs. Ideal for competition cars looking to reduce weight. See GL019 for a version with 5mm thick Lexan. See also part number...

Combined brake and clutch fuild cannister/reservoir to suit 102 Series 2000 cars. Dual outlet, with Girling sticker.

Stainless steel outer headlight ring to fit non-stepfront GTVs and GT Juniors, as well as 1750 Berlinas. Note that this part has the 'cutout' to suit cars with the small headlight height adjustor levers on the bottom of the headlight bowl. 

Steel spring clip to fit the dust seals on the 38mm diameter piston ATE rear brake calipers fitted to all ATE braked 105 series cars from about 1967 onwards. Should be used in conjunction with the kits available under item code BR036 or BR082.2 required...

Steel spring clip to fit the dust seals on the 48mm diameter piston ATE front brake calipers fitted to all ATE braked 105 series cars and some 116 and 75 models. Should be used in conjunction with the kits available under item code BR035 or BR081. 2...

Facet fuel pump mounting kit - suits both Silver Top and Red Top pumps. Consists of rubber mounting bushes and earth wire.

Polished aluminium headlight ring to fit all Stepfront GTs 1964-70

High performance 'Red Top' Facet electric fuel pump. Ideal for high horsepower carburetted racing cars. This latest variant now has solid state technology to provide superior reliability over the older points triggered types. The Interrupter fuel pumps...

101 tooth starter ring gear for 750 series 1300 engines.  

Spare wheel hold down screw to suit all 750 & 101 Series Spiders

Rubber battery base tray to suit 102 Series 2000 and 106 Series 2600 cars. See code 1900/102-280 for the top battery cover to match this.   Dimensions 185mm x 275mm x 25mm (approx 7.3 x 10.8 x 1 inches)

Rubber seal for where the 'Aeroplane' numberplate light mount attaches to the bootlid on 750 and early 101 Series Sprints.  

Cylinder head to exhaust manifold gasket to 750 Series 1300 engines. 4 required per engine.

Rear wheel brake cylinder to suit 101 Series cars with the larger rear brake shoes. One cylinder per wheel.

Bush for the bottom of the clutch pedal arms on 750 and 101 Series cars. Dimensions OD - 20mm, ID - 8mm, width - 19mm. May require slight trimming to fit some pedal arms.

Flame-polished scratch-resistant Lexan polycarbonate side window set to suit a Giulia saloon. Ideal for competition cars. Available to order, please enquire for more details. See item code GL023 for the matching rear window to suit a Giulia saloon.

Starter ring gear with 130 teeth to suit Fuel Injected engines from 1986 onwards. ** NOTE ** - This is different to item code EN086 for carburettor cars. This ring gear has a bigger internal diameter of 250mm instead of 230mm for flywheels from...

Starter ring gear with 131 teeth. Usually found on fuel injected USA specification engines. ** NOTE ** - European specification fuel injected engines use a ring gear with 130 teeth available under item code EN086/2. Count the teeth on your ring gear...

Rebuild kit to suit all rear ATE brake calipers, including new pistons and seals. With a piston diameter of 38mm this kit will suit all ATE rear calipers from 1967 onward. Note that the pistons are cup shaped and do not have the original-style...

Rebuild kit for one front ATE brake caliper, including new pistons and seals. With a piston diameter of 48mm this kit will suit both 1300/1600 (smaller) and 1750/2000 (large) ATE front calipers from 1967 onward. 1 kit will do 1 caliper ** NOTE ** - The...

Rear trim joint cover to suit the stainless steel trim piece behind the soft top on all Spiders 1970-93.  Two per car - fits either side.

Facet Silver Top low pressure electric fuel pump designed for use with carburettors. This latest variant now has solid state technology to provide superior reliability over the older points triggered types. The Interrupter fuel pumps can be fitted...

Fuel sender unit to suit Bosch & Spica fuel injected Spiders from 1978 to 1993. Can be made to work in EARLY USA specification Spica mechanical fuel injected cars with bottom-feed fuel tanks, by modifying the sender unit by blocking off feed...

Enamel triangular Autodelta badge with adhesive on the rear for affixing to car bodywork without drilling holes for mounting pins. Dimensions: Flat to point (width) - 71.1mm Thickness - 2mm