Categories

Motorsport Classic High Performance 20w50 Competition classic racing NANODRIVE triple ester Engine Oil FEATURES AND BENEFITS A reduction in friction of up to 63% providing a reduction in wear of up to 38% compared to other synthetic based non Nanodrive...

Wooden, gloss finish gearknob with Alfa badge. Included are 3 different inner diameter sleeves to allow for multiple gear shaft diameters as well as 4 threaded locking pins

New plastic front grille / bootlid badge without the Milano text as originally fitted to cars from 1972 onwards.

Right rear wing/fender 'Number 4' repair section to fit all GT/GTV models 1964-76. Covers the section behind the right rear wheel of the car.

Left rear wing/fender 'Number 4' repair section to fit all GT/GTV models 1964-76. Covers the section behind the left rear wheel of the car.

Right rear wing/fender 'number 3' repair section to fit all GT/GTV models 1964-76. Covers the section in front of the right rear wheel of the car.

Left rear wing/fender 'number 3' repair section to fit all GT/GTV models 1964-76. Covers the section in front of the left rear wheel of the car.

Right front wing/fender repair section to fit all GT/GTV models 1964-76. Covers the 'No.2' section behind the right front wheel of the car.

Left front wing/fender repair section to fit all GT/GTV models 1964-76. Covers the 'No.2' section behind the left front wheel of the car.

Two piece set of seat covers to fit the rear seat on a 1750 GTV Mk 1 model, produced in the correct original style and black vinyl material.

Two piece set of seat covers to fit the rear seat on a 1750 GTV Mk 1 model, produced in the correct original style and brown vinyl material.

Pair of complete front seat covers to fit the special seats in 1750GTV Mk 1 models, done in the correct original style and brown vinyl material. EUROPEAN SPEC. CARS ONLY, USA VERSION HAS TOP STATIC HEADRESTS (SEE IN IN012/1) ON BOTH SEATS AND SOME...

Pair of complete from seat covers to fit the special seats in 1750GTV Mk 1 models, done in the correct original style and black vinyl material.  EUROPEAN SPEC. CARS ONLY, USA VERSION HAS TOP STATIC HEADRESTS (SEE IN IN012/1) ON BOTH SEATS AND SOME...

Headlight seal to suit the inner headlights on 1750 2000 GTVs and Mk 1 1750 Berlinas and all the headlights on later Berlina saloons. Can also be used on inner headlamps on Giulia Saloons.

Headlight lens to bowl seal to fit 7 inch headlights on all non-Stepfront GTs/GTVs and Saloons. Can also be used on Stepfront GTs as a replacement for the original lens to bowl seal

Carello 7 inch headlight retaining ring. Suitable for the following vehicles: All Step-front GT models (1963-68) USA 1750 Mk2/2000 GTVs All 105 Spiders (1966-93) 750/101 cars with 7" headlamps May also fit some earlier Giulia Ti, Ti Super...

Big brake conversion kit for 1300/1600 cars (cars fitted with ATE 76mm caliper spacing steering uprights). This fantastic kit comprises lightweight 4 pot calipers etched with our cloverleaf logo, vented 280mm grooved discs with specially machined...

Big brake conversion kit for 1750/2000 cars (cars fitted with ATE 89mm caliper spacing steering uprights). This fantastic kit comprises lightweight 4 pot calipers etched with our cloverleaf logo, vented 280mm grooved discs with specially machined...

Special Classic Alfa 7 x 14 inch ET23 GTA heat treated alloy race wheel. The big difference between our 7x14" GTA wheel and the others on the market is the steel stud inserts allowing repeated wheel removal without damage - very important...

Special Classic Alfa production GTA 7x14" replica alloy wheel, ET23 finished in "magnesium look". We have made a limited number of our GTA wheels with a bare alloy finish which we have then put through a special process to get a...

Classic Alfa GTA 7x14 inch replica alloy wheel - ET19 offset to suit the front wheels of steel bodied cars with Dunlop brakes. Manufactured here in the UK; weighing less than 7.0 kg, we have fitted them with steel inserts to allow regular wheel changing...

Classic Alfa GTA 7x14 inch ET23 replica alloy wheel. Weight just under 7.0 kg. The big difference between our 7x14" GTA wheel and the others on the market is the steel stud inserts allowing repeated wheel removal without damage - very important on...

Classic Alfa production of this 5 x 15" Giulietta alloy wheel. Fantastic lightweight alloy replica of an original Alfa/Campagnolo wheel copied in every detail including the original strengthening ribs on the rear and vent hole profile. ET35 offset and 5"...

Single speed two position (i.e. off and on) toggle switch to suit either dash lights, heater or wiper switches on some early 105 series cars, or any other suitable application. No logo on the switch. Original Lucas part.