Categories

Red sticker for rad cap

Square style radiator cap to suit 1750 105-series models from 1968 onwards, all Montreals and most 105/115 series models from 1970 onwards. Also fits many 116 and 75 models. Pressure rated to 0.7 bar - 10 psi.

Round style radiator cap to suit 1600 Roundtail spiders, Step-front cars (to 1970) and equivalent Giulia saloons. Also fits 101 Series (and possibly 750 series) cars as well. Pressure rated to 0.5 bar - 7.25 psi. Also used on the expansion tank on the...

Reproduction of early Bosch style rotor arm - fixed to distributor shaft with a screw. This style of rotor arm is always combined with the two piece ignition points available under code IG016.

Standard 105 series engine mounts are sometimes found to be too soft for competition use, allowing the engine to move around too much under load. These heavy duty engine mounts are ideal for high performance engines and competition use, while still...

Standard 105 series engine mounts are sometimes found to be too soft for competition use, allowing the engine to move around too much under load. These heavy duty engine mounts are ideal for high performance engines and competition use, while still...

Pair of Carello 2600 (106), 2000 (102) Sprint & Junior Zagato (105) indicator clear units. Will also fit USA market mk1 1750 GTV 1968-1969. If you require an amber lens, please specify this at check out. These are fitted as sidelights or sometimes...

Carello 2600 (106), 2000 (102) Sprint & Junior Zagato indicator amber lens, right hand. Will also fit USA market mk1 1750 GTV 1968-1969.

Carello 2600 (106), 2000 (102) Sprint & Junior Zagato indicator amber lens, left hand. Will also fit USA market mk1 1750 GTV 1968-1969.

Battery support panel - fits all early 105 cars (1963-67) with the metal battery tray and shield and all step-front GT / GTJ (1964-70).

Carello 2600, 2000 Sprint & Junior Zagato indicator clear lens, right hand.

Carello 2600, 2000 Sprint & Junior Zagato indicator clear lens, left hand.

Altissimo branded right hand front indicator / side light lens to fit a Touring bodied 2600 Spider.

Altissimo branded left hand front indicator / side light lens to fit a Touring bodied 2600 Spider.

Front gearbox oil seal for early 750 series cars with the Borg Warner 'barrel box'. 

Front gearbox to bell housing oil seal, to use a late hyradlic gearbox with an early cable clutch bell housing.

Complete right side aluminium rear wing/fender. Stamped from accurate tooling - not a hand-made approximation. Uses the correct early style arch profile as used on original 1600 GTA models 1965 to 1967

Complete left side aluminium rear wing/fender. Stamped from accurate tooling - not a hand-made approximation. Uses the correct early style arch profile as used on original 1600 GTA models 1965 to 1967.

Scuttle panel for Series 3 Series 4 Spiders. Covers the area in front of the screen. You will need to use the plastic vent cover from your old panel to fit to the new panel.

Buy the set of 4 GT splash panels - made from aluminium so they never rust again - at a discounted set price.

Battery support panel - fits all cars, replace your rusted battery tray!

Superflex polyurethane heavy duty shock absorber bush. Fits the upper section on front shock absorbers and top and bottom of the rear shock absorbers on all 105 Series cars. We recommend Superflex as they only use very high quality TDI...

Stainless steel rear exhaust pipe section to suit all Kamm-Tail/Series 2 Spiders from 1970-83 with the correct 'down turned' style chrome tip. Also used on 1600 Junior Zagato. Please see EX023 for the corresponding exhaust O-ring.

Lower front chassis repair insert Spider 83-93