Categories

Pair of small rubber buffers for the glovebox lid on late 750 and all 101 Series Spiders.

Tab washer for the lower wishbone bush on all 105 series cars. One washer used per bush. The bushes are available separately under item code SU042 and end caps under item code SU043.

Enamel/metal serpent right hand C pillar badge to fit Giulia Saloons. See item BG046 for the matching badge for the left side of the car. Dimensions: Height - 55mm Width - 41mm Thickness - 2mm

Enamel/metal serpent C pillar badge to fit Giulia Saloons. See item BG047 for the matching badge for the right side of the car. Dimensions: Height - 55mm Width - 41mm Thickness - 2mm

All 105 cars with the ignition switch on the column shroud. Will also fit all Spider Roundtails.

Moulded base for ashtray mounted on the transmission tunnel, for Spiders without centre console 1966-82 and some early 1300 GT Juniors.

Small repair section to cover the top grille mounting area on all Roundtail Spiders 1966-69. Can be used in conjunction with the Kammtail upper front panel (our part ST059) to replace the complete upper front panel on a Roundtail Spider.

Carello branded front indicator repeater lights - round type. Includes base to body seal. As fitted to later GT Juniors and GTVs, Series 2 Spiders, Berlinas and Montreals. Diameter - 34.5mm Unit depth - 50mm Length (from mounting surface including...

Set of EBC Yellow Racing front pads to fit Dunlop braked cars - developed specially for Classic Alfa by EBC. Suitable for track days and race events.

Re-bound strap fitting kit consisting of four metals plates and nuts and bolts to join the straps together to fit all 105 series cars. These plates will also fit on 1900/2600 cars but may need some fettling to fit. Straps available separately...

Set of 4 rear suspension rebound straps (inner and outer for each side) to suit all 105 series Saloons, Coupes and Spiders as well as Montreals. Also available is a fitting kit of metal plates under item code SU076.

End cap for the bottom wishbone bush fitted to post 1968 105 Series cars.

Red Altissimo branded front side repeater light and reflector lens with chrome frame to fit USA specification cars from 1971 onwards. On GTs this is used on its own, whereas on Spiders it's used in conjunction with a chrome insert.

Rear bumper for 101 Series Sprint Speciale. Supplied unchromed. Front bumper available under 101-190 SPRINT SPECIALE FRONT BUMPER SPECIAL ORDER ONLY. PLEASE CONTACT info@classicalfa.com

Amber Altissimo branded front side repeater light and reflector lens with chrome frame to fit USA specification cars from 1971 onwards. On GTs this is used on its own, whereas on Spiders it's used in conjunction with a chrome insert.

Complete rear right red Altissimo branded, side marker lens to fit USA specification Spiders from 1971 onwards. Two used per car. See part LT141 for left side. If you require the amber front marker see LT139 & LT140

Complete rear left red Altissimo branded, side marker lens to fit USA specification Spiders from 1971 onwards. Two used per car. See part LT142 for right side. If you require the amber front marker see LT139 & LT140

Complete front left Amber Altissimo branded, side marker lens to fit USA specification Spiders from 1971 onwards. Two used per car. See part LT139 for right side. If you require the rear red marker see LT141 & LT142

Complete front right Amber Altissimo branded, side marker lens to fit USA specification Spiders from 1971 onwards. Two used per car. See part LT140 for left side. If you require the rear red marker see LT141 & LT142

Sprint bumper set, from 1954 to 1958. These are made in stainless steel and are painted black on the inside.

Full carburettor rebuild kit to suit Weber 40 DCOEs - kit does 2 carburettors

Carburettor rebuild kit to suit Weber 45 DCOEs - kit does 2 carburettors

Sprint bumper set, from 1959 to 1963. These are made in stainless steel and are painted black on the inside.

Pair of rubber bonnet/hood stops or buffers to fit 2600 (106 Series) cars. For bonnet/hood hinged at firewall end. Approximately 52mm high.