Categories

Pair of small chrome/polished interior door trim edging pieces for 750 & 101 Series Sprints, Sprint Speciales, 102 (2000) and 106 (2600) Series cars.

Early style cam cover (dished at rear - no front bolt holes) to suit GTA engines. Beautifully cast in magnesium and very lightweight.

Beautifully made magnesium version of the deep 3 row GTA sump. Lightweight at 3.2kg! Requires the GTA oil pump when fitting to a non-GTA engine.

USA specification (all red) right rear tail light lens to suit 1750 GTVs and GT Juniors 1968 onwards. Will also fit earlier cars if the tail light backing is changed to match the later style units.

USA specification (all red) left rear tail light lens to suit 1750 GTVs and GT Juniors 1968 onwards. Will also fit earlier cars if the tail light backing is changed to match the later style units.

Right front wing/fender to fit Series 3 Spiders 1983-89.

Left front wing to fit Series 3 Spiders 1983-89.

Set of outer door handle seals for all Roundtail Spiders, and later Spider Juniors fitted with Roundtail door handles. Only available as a full car set.

Veloce badge for the rear of 101 Series 1600 Spider Veloce

Clutch & brake pedal rubber to suit all 750 and 101 Series cars. Two required per car.

Rubber quarterlight seal to suit all Spiders 1970-93. This seal is for the right side of the car looking from the rear of the car. See item code RB025 for the matching part for the left side of the car.

Rubber quarterlight seal to suit all Spiders 1970-93. This seal is for the left side of the car looking from the rear of the car. See item code RB026 for the matching part for the right side of the car.

Outer door handle seal to suit all Spiders with flush door handles 1970-93.

Plastic clip to attach door trim panel on Series 4 Spiders 1990-93. (also used on some late series 3 spiders) QUANTITY OF CLIPS REQUIRED FOR EACH DOOR: **Some** Series 3 Spider from 1988-89: IN106 X7 IN078 X7 IN079 X7 Late Series 3...

Door panel clip receiver to fit all Spider door trims. This part fits into the door frame on all Spiders, quantity depending upon the model/year of the car. Used in conjunction with IN078 that attaches to the trim panel. Also suitable to be used for the...

Door panel retaining spring clip to suit all Spider door trim panels 1966-84 (also used on some early series 3 spiders). Use in conjunction with the clip receiver available under item code IN079.  

Cable window regulator to fit the right hand door of all Spiders 1974-89 without electric windows. Note that this regulator has a splined shaft length of approximately 40mm. Earlier regulators have a shaft length of approximately 30mm. Check yours...

Cable window regulator to fit the left hand door of all Spiders without electric windows 1974 - 1989. Note that this regulator has a splined shaft length of approximately 40mm. Earlier regulators have a shaft length of approximately 30mm. Check yours...

Pair of rear taillight body to car seals to sit Sprint GT to 1750 GTV Mk 2. Note - does not suit the special taillights fitted to 1750 GTV Mk 1 - see LT021/1

Standard rear suspension trailing arm bush to fit pre-1968 cars which use a smaller bush on the arm to body joint. Bush approx 36mm diameter.

Uprated (shore 80 rating) rubber bush to fit the front joint of the trailing arm to the body on all 105/115 series cars including Montreals. Diameter - 50mm (approximately) Standard version of the bush is available under item code SU063 and...

Uprated (shore 80 rating) rubber bush to fit the rear joint of the trailing arm to the back axle on all 105/115 series cars including Montreals. Diameter - 44mm (approximately) Standard version of the bush is available under item code SU061 and...

Reproduction deep 3 row GTA sump pan. Nicely cast in aluminium. 4.8kg. Requires a GTA oil pump if you are fitting to a non-GTA engine.

Spacer plate for bell housing. Please check photo carefully, to make sure this part is correct for your vehicle. This spacer is generally fitted on cars with hydraulic clutch from 1968-1975