Categories

Pair of boot hinge rubber seals to suit 750 and early 101 Series Spiders with a separate hook for the soft top / hard top.

Battery cover/top to suit all 750 and 101 Series cars. Dimensions 23 x 17 cm (9" x 6.5")

Rear wheel bearing (67mm outer diameter) to suit 750 Series and early 101 Series cars with the smaller diameter rear axles.

New oil and water temperature sender unit to fit 750, 101, 102 (2000) and 106 (2600) Series cars. Thread Size - M16x1.5 ** NOTE ** - This sender now comes with a spade style electrical connector, so you may need to modify your wiring slightly to suit...

Oil gauge pressure hose for 750 101 Series cars as well as 106 Series 2600 cars.

Rubber clip for holding down the rubber boot (trunk) mats down in early Spiders from 1966-78. 22 are required in total for Roundtail cars up to 1970 and 11 for Kammtail versions from 1970 onwards.  

Fuel flap seal for all Spiders from 1966 to 1993.

Fuel filler neck seal Spider

Interior drivers side door pull to suit all 105 Series Spiders 1966-78. Also used on 101 Series Spiders as well.

Passenger interior grab handle as fitted to the door trim of all Spiders 1966-1978. Can be fitted to either side - dependent on left or right hand drive.

Rear number plate light for S3 Spiders and some 116 models. Please see LT085 for the correct bulb to suit this light.

Wiper spindle cap - black - Fits under the wiper arm and covers the spindle nut on GTs, GTVs, Supers, Berlinas Roundtail Spiders. Sold individually.

Rear Number plate plastic frame to match the originals found on GTs and GTVs from 1970 onwards. Can also be fitted to earlier GTs/GTVs in need as well as a replacement for the stainless steel frame and mount on those cars. Used in conjunction...

Serpent badge to suit the right side (looking from the rear of the car) C pillar of a 2000 GTV. See BG008 for the matching badge for the left hand side of the car.

Serpent badge to suit the left side (looking from the rear of the car) C pillar of a 2000 GTV. See BG008/1 for the matching badge for the right hand side of the car.

Steel bootlid to fit 1750 GTV Mk 2 and 2000 GTV models with the insert/indentation for the round bootlid badge. This is the best fitting bootlid on the market!

Steel bootlid to fit all GT/GTV models up to Mk 2 1750 GTVs and all GT Juniors - without the recess/indentation for the rear bootlid badge. See code ST017 for the later version with the indentation to fit 1750 GTV Mk 2 and 2000 GTV models. This is...

Budget carpet set in black to suit all left hand drive GTs & GTVs with hanging pedals from 1970 onwards. This carpet is rubber backed and can be hard to fold and glue. Ideal for track cars or someone who's looking to revamp their interior for a low price...

Right main door rubber seal to fit all 105 series GTs, GTVs, GTAs. Thinner profile softer style rubber (made in Italy) - the best available! we have tested every door seal on the market on a totally original unrestored 21,000 mile car and with...

Left main door rubber seal to fit all 105 series GTs, GTVs, GTAs. Thinner profile softer style rubber (made in Italy) - the best available! We have tested every door seal on the market on a totally original unrestored 21,000 mile car and with this...

Large sized brake caliper bleed screw to fit 1750/2000 ATE front brake calipers.

Small sized brake caliper bleed screw to fit 1300/1600 small ATE front brake calipers and all ATE rear brake calipers.  

Our own production of GTA wheel nuts in the correct original style. Highly polished stainless steel - superb finish, with right hand thread. Goes perfectly with our replica GTA wheels. Also fits our 5" + 5.5" TZ/Ti Super wheels as well. Left hand...

Our own production of GTA wheel nuts in the correct original style. Highly polished stainless steel - superb finish, with left hand thread. Goes perfectly with our replica GTA wheels. Also fits our 5" + 5.5" TZ/Ti Super wheels as well. Right hand...