Categories

Bush for the bottom of the clutch pedal arms on 750 and 101 Series cars. Dimensions OD - 20mm, ID - 8mm, width - 19mm. May require slight trimming to fit some pedal arms.

Flame-polished scratch-resistant Lexan polycarbonate side window set to suit a Giulia saloon. Ideal for competition cars. Available to order, please enquire for more details. See item code GL023 for the matching rear window to suit a Giulia saloon.

Starter ring gear with 130 teeth to suit Fuel Injected engines from 1986 onwards. ** NOTE ** - This is different to item code EN086 for carburettor cars. This ring gear has a bigger internal diameter of 250mm instead of 230mm for flywheels from...

Starter ring gear with 131 teeth. Usually found on fuel injected USA specification engines. ** NOTE ** - European specification fuel injected engines use a ring gear with 130 teeth available under item code EN086/2. Count the teeth on your ring gear...

Rebuild kit to suit all rear ATE brake calipers, including new pistons and seals. With a piston diameter of 38mm this kit will suit all ATE rear calipers from 1967 onward. Note that the pistons are cup shaped and do not have the original-style...

Rebuild kit for one front ATE brake caliper, including new pistons and seals. With a piston diameter of 48mm this kit will suit both 1300/1600 (smaller) and 1750/2000 (large) ATE front calipers from 1967 onward. 1 kit will do 1 calliper ** NOTE ** -...

Rear trim joint cover to suit the stainless steel trim piece behind the soft top on all Spiders 1970-93.  Two per car - fits either side.

Facet Silver Top low pressure electric fuel pump designed for use with carburettors. This latest variant now has solid state technology to provide superior reliability over the older points triggered types. The Interrupter fuel pumps can be fitted...

Fuel sender unit to suit Bosch & Spica fuel injected Spiders from 1978 to 1993. Can be made to work in EARLY USA specification Spica mechanical fuel injected cars with bottom-feed fuel tanks, by modifying the sender unit by blocking off feed...

Enamel triangular Autodelta badge with adhesive on the rear for affixing to car bodywork without drilling holes for mounting pins. Dimensions: Flat to point (width) - 71.1mm Thickness - 2mm

Flame-polished scratch-resistant Lexan polycarbonate rear windows for a Giulia saloon. Ideal for competition cars. See item code GL024 for the matching side windows to suit a Giulia saloon.

Lightweight Lexan polycarbonate rear window to suit all Bertone GTs. Ideal for competition cars. Available in 5mm thickness as per original GTAs. See GL020/1 for 4mm thick version for extra lightness.

Set of 6 flame polished scratch-resistant 5mm Lexan polycarbonate side windows to suit all Bertone GTs. Ideal for competition cars looking to reduce weight. This version is 5mm thick, see GL019/1 for a lighter weight 4mm version. See also part number...

Comprehensive set of rubber seals for all Kammtail Spiders, consisting of: RB011 - Door glass felt x2 RB021 - Windscreen rubber RB024 - Main door seal x2 RB023 - Main door seal end plug x4 RB025 - Left quarterlight seal RB026 -...

Comprehensive set of rubber seals for all Roundtail Spiders, consisting of: RB011 - Door glass felt x2 RB020 - Windscreen rubber RB022 - Main door seal x2 RB023 - Main door seal end plug x4 RB030 - Bootlid seal RB031 - Soft-top front...

Pair of rear numberplate light seals to suit 101 Series Spiders. Light units available separately under code 750-311 or 750-311/1 (non Carello version). Can also be used on the same light units fitted to all 105 Series GT/GTVs up to the 1750 Mk 1, early...

Rear number plate light seal - between light unit and bumper - for early 750 Series Spiders. Note - light unit available separately under code 750-313.

750/101 Series interior door handle with round fixing hole with cross/pin style fixing. See item code 750-122 for the matching style handle with a square fixing hole.

Complete rubber mat set for all later 101 Spiders - 7 pieces including boot mats. Beautiful quality and reproduced in the correct original style, with the embossed Alfa logo. For the earlier version without the logo, see item code 750-400. Note that the...

Spider 1970-93 hardtop support piece (chrome). This part is for the right side of the car looking from the rear. See item code CH042 for the matching part for the left hand side of the car.   Also available is the rubber seal that sits underneath this...

Spider 1970-93 hardtop support piece (chrome). This part is for the left side of the car looking from the rear. See item code CH043 for the matching part for the right hand side of the car.   Also available is the rubber seal that sits underneath this...

New chrome piece that sits on the top of the 'B' pillar behind the door on all Spiders 1970-93. Right hand side. See item code CH039 for the same on the left hand side of the car - looking from the rear.

New chrome piece that sits on the top of the 'B' pillar behind the door on all Spiders 1970-93. Left hand side. See item code CH040 for the same on the right hand side of the car - looking from the rear.

Chrome piece that sits on the top of the 'B' pillar behind the door on all Roundtail Spiders 1966-70. Right hand side. See item code CH037 for the same on the left hand side of the car - looking from the rear.