Categories

GT/GTV door check strap pin to suit all GTVs 2000 & late JUNIORS from 1972 onwards, as well as all Giulia saloon's. This pin goes through the hole in the check strap arm to locate it into the door hinge. Please see: MI018 (Late GTV check...

Courtesy boot light unit for all Montreals.

Used crankshaft from a 1300cc 105 series engine. Big end and main bearing journals are currently at 010 so it has plenty of scope for a re-grind, presumably to 020. Note, the journals have a coating of rust from storage.

Used crankshaft from a 2000cc Alfetta engine. Main bearing and big end bearing journals are both currently at 010 undersize. As well as 2 litre Alfettas, it will also fit 2 litre 105-series engines if the rear of the crank is drilled out to accept a...

Used crankshaft from a 2000cc Alfetta engine. Main bearing and big end bearing journals are still within STD measurements so it has never been re-ground. As well as 2 litre Alfettas, it will also fit 2 litre 105-series engines if the rear of the...

Spark plug - BCP6ET suitable for the 8V Twin Spark engine. Three electrode and removable top tip.

Fuel filter for all 75 1.8 Turbo models. Also fits Alfa Romeo 916 all models.

Fuel filter for all 75 2.0 Twin Spark models. 

Giulia 105 two piece "GIULIA 1300 TI" script badge. Normally fitted on boot/trunk lid on early Giulia saloon.  SIZE: GIULIA 1300 = 160mm wide,  20mm tall           TI= 25mm wide, 20mm tall

Giulia Ti & Super early indicator repeaters chromed. Sold as a pair.

Useful in-line universal fuel filter that can serve as additional fuel filtration or as a cheap replacement for the original filter unit. Suitable for all carburettor-equipped models.

Giulia 105 one piece "Giulia 1300" script badge. Normally fitted on boot/trunk lid on early Giulia saloon.  SIZE: 150mm wide,  25mm tall   

Giulia TI 105 script badge. Normally fitted on boot/trunk lid on early Giulia saloon.  SIZE: GIULIA SCRIPT 100mm wide,  20mm tall.  

Lambda sensor for S4 Spider and 75.

Non-return valve for the servo as fitted to cars with hamging pedals.

Giulia 105 one piece "Alfa Romeo" script badge. Normally fitted on boot/trunk lid on early Giulia saloon.  SIZE: 200mm wide,  20mm tall ( except the "L" & "F" which measures 25mm)  

105 series suspension ball joint kit - Includes a pair of lower ball joints, castor arm ball joints & adjustable top suspension arms.

Rear number plate light for USA model 2000 Kammtail Spider. Normally fitted on cars made between 1970 and 1979. Please see pictures for reference. 

RIGHT Kammtail Spider CLEAR quarterlight glass. This quarterlight glass has been customised so the quarterlight lever is screwed through a hole and not glued. Please note the lever is supplied but not fitted - it will require a certain level of...

LEFT Kammtail Spider CLEAR quarterlight glass. This quarterlight glass has been customised so the quarterlight lever is screwed through a hole and not glued. Please note the lever is supplied but not fitted - it will require a certain level of mechanical...

Pair of front bumper support brackets to suit all Spider Roundtail.

Athesil RTV silicone sealant. A premium sealant/ gasket maker developed by Athena for professional use in engine maintainace and repair. The RTV (room temperature vulcanizing) silicone seals plastic metal componants, crankcases, manifolds ...

Montreal fuel pump. Two required per car.

Lower inner wing strengthening panel left. Fits all 105 series cars from 1962-77.