EN074 VALVE GUIDE STEM SEAL 9mm

Inlet valve guide to fit all 4 cylinder 101, 105, 116 and 75 engines - plus Montreal - with 9mm valve stems. Not TS. Can also be used as an exhaust valve guide if you wish to fit valve stem seals on...

Set of 4 high quality (Payen brand or similar) valve guide oil seals to fit 8 mm diameter valve stems.

Exhaust valve guide to suit all 4 cylinder 101, 105, 116 and 75 engines, plus Montreal - with 9mm valve stems. Not TS. Sold individually.

Valve stem retaining collet to suit all 4,6 and 8 cylinder 101, 105, 116, Montreal and 75 engines except TS. 2 used per valve, 9mm

Exhaust manifold nut to suit 101, 105, 116 and 75 engines, including V6. 8 fitted per cylinder head. These are a smaller outer diameter than the original which makes tightening easier as you have...

Colombo & Bariani have been manufacturing both original equipment and performance camshafts for cars and motorcycles over 60 years.  These 10.9mm lift camshafts are excellent for fast road 1300/1600...

Colombo & Bariani have been manufacturing both original equipment and performance camshafts for cars and motorcycles over 60 years. This 10.9mm lift camshaft is excellent for fast road...

Exhaust/inlet manifold stud 34mm to suit all 4 cylinder 101, 105, 116 and 75 engines, including TS. There are 8 on the exhaust side and 7 on the inlet side, of which three are longer and not...

Set of standard valve springs to suit all 4 cylinder 101, 105, 116 and 75 engines, including TS.

Colombo & Bariani have been manufacturing both original equipment and performance camshafts for cars and motorcycles over 60 years.  These 12mm lift camshafts are for performance 2000 engines and...