EN111 GTA STYLE OIL CAP WITH BREATHER

Fabricated MOCAL alloy 1 litre oil catch tank. Includes oil level site gauge. Also note that the inlet diameter matches the outlet diameter of the twin-cam cam cover breather. See also EN576...

Period rampipes - reproduction of the style used on GTA Corsa cars in period. The trumpets can be set at any angle you wish to alter the ram effect of the air intake. Can be used in conjunction with...

Twin-plug cylinder head to suit both 1300 1600 GTAs. Requires valve guides, seats and porting to your specification. This Italian casting has been sold for many years and is the most race...

When you remove the standard air cleaner on carburettored Alfas you need to duct the vapour from the cam cover. K&N manufacture this oil breather catch filter specifically for this purpose...

Oil filler cap - metal bayonet style as fitted to most Nord twin-cam engines.

Clear breather pipe hose to fit between the cam cover breather pipe and catch tank available under code EN575. Hose is clear to enable you to easily check if oil is being discharged into the catch...

Colombo & Bariani have been manufacturing both original equipment and performance camshafts for cars and motorcycles over 60 years. These 10.9mm lift camshafts are excellent for fast road...

Curved oil breather hose from the cam cover to the air filter canister on many of the 105 series cars. Note that this fits both the early style 'crossover' air-cleaner setups as well as the later...

Early style cam cover (dished at rear - no front bolt holes) to suit GTA engines. Beautifully cast in magnesium and very lightweight.

Set of six 'washers' (four fibre, two aluminium) for the cam/valve cover hold down bolts on all 101 and 105 series twin-cam engines. The same washers are also used on Montreal engines - please...