EN609 GTA/GTAM VALVE COVER GASKET (TESTA STRETTA)

Set of 4 fibreglass wheel arch extensions to suit GTAm/GTA Group 5 'widebody' replicas. These will fit early "step-front" cars as well with minor modification - see last photo - it is our performance...

Top quality cylinder head gasket for GTAm 1750 85mm. Individual rings, 1.6mm thicknes.

Early style cam cover (dished at rear - no front bolt holes) to suit GTA engines. Beautifully cast in magnesium and very lightweight.

Valve guide to fit FIA specification GTA inlet valves with 8mm stem diameter. Please note that original GTA valves were 8.5mm stem, we use an 8mm valve as it will improve intake flow.

Valve guide to fit FIA specification GTA exhaust valves with 8mm stem diameter. Please note that original GTA valves were 8.5mm stem, we use an 8mm valve as it will improve exhaust gas flow.

Pair of brackets to mount original GTAm ATE front brake calipers to standard 105 series uprights. You must cut off the caliper mounting lugs on a standard upright and then bolt this bracket on. Note...

Lightweight carbon dashboard GTAm style for left hand drive cars.

Replica fibreglass later style dashboard to suit GTAm replicas. Left hand drive version, made in Germany. Supplied undrilled and uncut to allow fitment of standard or non-standard...

Vented GTAm style front brake rotor. Approx. 250mm diameter and 22mm thickness. To be used with special GTAm brake calipers available under code GTA201.