The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
Uprated heavy duty version of GB031, made with harder grading of rubber, suitable for fast road or competition use on all 750, 101, 102, 105 and 106 series cars. Use in conjunction with the...
Front coupling bolt to fit all 750, 101, 102, 105 and 106 series cars except Montreals. If you require the nut, please follow this link SU202 M12 NYLOCK NUT
Special 8 bolt hole propshaft 'doughnut' coupling to suit 1900 cars and 102 Series 2000. These cars also use the normal 6 bolt hole coupling on the centre, which is available under code...
Lightweight cage for the front propshaft 'rubber donut' (front coupling) on all 105 series cars. Helps prevent the donut 'growing' at high revs and reduces the chance of damage and loss of drive...
New old stock, front half section of the propshaft to suit a 2000 GTV, with center support and coupling doughnut.
Uprated heavy duty version of GB031, made with harder grading of rubber, suitable for fast road or competition use on all 750, 101, 102, 105 and 106 series cars. Use in conjunction with the 'cage'...
Here is a diagram showing the location of some of the parts in this category.
Propshaft centre support bush and bracket to suit Hydraulic clutch models 1968 onwards. Holds the centre support bearing available separately under code GB030, which is retained by a circlip also...
Front coupling bolt to fit all 750, 101, 102, 105 and 106 series cars except Montreals. If you require the nut, please follow this link SU202 M12 NYLOCK NUT
OE quality SKF propshaft centre bearing for all 750, 101, 102 Series 2000, 106 Series 2600 and 105 series cars, including Montreals plus 4 cylinder 116 and 75 models. Inside diameter 30 mm, OD 62...
Small rubber 'bush' that fits over the nose of the propshaft where it slots into the back of the gearbox on 750, 101 and 105 series cars. Fits against the 'Top Hat' bush in the back of the gearbox...
Heavy duty version of the propshaft centre support rubber bush and bracket. Ideal for competition use and for the support bush and bracket on Montreal's as well.
Small bush that fits into the nose of the propshaft which the rear of the output shaft of the gearbox which fits into. See also GB043 for the small rubber bush that provides some 'shock absorption'...
Propshaft centre bearing for all 750, 101, 102 Series 2000, 106 Series 2600, and 105 series cars. Inside diameter 30 mm, OD 62 mm, width 16 mm. ** See GB030HD for SKF / FAG version of this bearing...
Propshaft universal joint to suit 105 series cars (not Montreals) from 1968 onwards. Roller cage is 24mm in diameter. Earlier cars (750, 101 and 105 Series to 1968) with the earlier style propshaft...