GB032 PROPSHAFT NUT 9MM

New propshaft rear half, including sliding spline, to suit Giulia saloon. Note that this shaft has 9mm bolt holes on the flanges at each end to suit cars from early 1970s onwards.

13mm nut to suit the 8mm propshaft bolt, available under code GB096. 8 required in total per car - 4 each end of the propshaft.

Propshaft centre bearing nut

New propshaft rear half, including sliding spline to suit all GT/GTVs from 1964 - 1976. Note that this shaft has 9mm bolt holes on the flanges at each end to suit cars from early 1970s onwards...

Here is a diagram showing the location of some of the parts in this category.

Propshaft bolt - 13mm head and 9mm shank. Note that these bolts (8 required per car) are only suitable for later model cars with 9mm holes in the propshaft ends. Earlier cars use a slightly smaller...

Lightweight cage for the front propshaft 'rubber donut' (front coupling) on all 105 series cars. Helps prevent the donut 'growing' at high revs and reduces the chance of damage and loss of drive...

Propshaft bolt - 13mm head and 8mm shank. Note that these bolts (8 required per car) are only suitable for early model cars with 8mm holes in the propshaft ends. See part number GB097 for a matching...