GB043/2 PROPSHAFT 'TOP HAT' INTERNAL BUSH/PAD

Small bush that fits into the nose of the propshaft which the rear of the output shaft of the gearbox whichfits into. See also GB043 for the small rubber bush that provides some 'shock...

Small rubber 'bush' that fits over the nose of the propshaft where it slots into the back of the gearbox on 750, 101 and 105 series cars. Fits againstthe 'Top Hat' bush in the back of the...

Set of three rubber stoppers for the pedal box on left-hand drive standing pedal 105 series cars 1964-69.

Heavy duty SKF / FAG propshaft centre bearing for all 750, 101, 102Series 2000, 106 Series 2600 and 105 series cars, including Montreals.Inside diameter 30 mm, OD 62 mm, width 16 mm...

Angled plate that fits either side of the propshaft centre support bearing on all 101 Giulia and 105 Series cars, including Montreals. Two per car.

Large 55mm bore GTA exhaust manifold. Designed to suit 1300 & 1600 GTA engines, but will also work well on 1750 & 2000 engined GT/GTVs and can be adapted to work onGiulia Saloons as...

GTA 55mm bore tailpipe without silencer. Uses o-ring gasket EX023. Works in conjunction with the rest of the GTA system - exhaust manifold available under item code EX039, centre section under item...

Replacement rear wheel bearing kit - bearing, seal and shrink ring - to suit all limited slip axles (found in all 2000 cars) from 1972 onwards and all 1600 cars from 1975 onwards. One kit does one...

Heavy duty version of the propshaft centre support rubber bush and bracket. Ideal for competition use and alsodirect replacement for the support bush and bracket on Montreals as well. ...

Propshaft centre supportbush and bracket to suit Hydraulic clutch models 1968 onwards. Holds the centre support bearing available separately under code GB030, which is retained by a circlip...