Rear wheel bearing kit - bearing, seal and shrink ring - to suit all limited slip axles (found in all 2000 cars) from 1972 onwards, as well as all 1600 cars from 1975 onwards. One kit does one side of the axle, two required per car. See item code SU023 for the rear wheel bearings for earlier 105 Series and late 101 Series cars. Note that the bearing fits Montreal differentials, but they use a different oil seal and bearing retaining ring.
GB051 DIFFERENTIAL PINION OUTER (FRONT) BEARIN…
Differential pinion outer (front) bearing to suit the larger pinion fitted to limited slip differentials found in 2000cc cars. Internal diameter 33.3mm, OD 68.26mm, width 22.2mm.
£29.00
GB051/1 DIFFERENTIAL PINION INNER (REAR) BEARI…
Differential pinion inner (rear) bearing to suit the larger pinion fitted to limited slip differentials found in 2000cc cars. Internal diameter 34.9mm, OD 76.2mm, width 29.4mm. This item will also...
£37.50
SU023 REAR WHEEL BEARING KIT 1300-1750 CARS TO…
Rear wheel bearing kit - bearing and oil seal - to suit 1300, 1600 and 1750 cars until approximately 1974. Does not suit the 2000 style limited slip rear axle as that has larger diameter halfshafts...
£24.00
SU024 REAR HALFSHAFT BEARING SHRINK RING
Shrink ring used to retain the rear outer wheel bearing on 2000 limited slip differential axles. This part is included in the SU023/1 rear wheel bearing kit.
£7.50
SU026 REAR HALFSHAFT OIL SEAL - LIMITED SLIP 2…
Rear half-shaft oil seal to suit 2000 limited slip rear axles with the larger diameter half-shafts used from 1972 onwards and all rear axles from about 1975 on (including non LSD axles)...
£3.25
