Superflex polyurethane bush to fit into the rear joint of the trailing arm where it connects to the rear axle. Much stiffer than rubber bushes, we recommend them only for track use. Sold as a pair.
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
Standard bush for the rear joint that connects to the rear axle on the rear suspension trailing arm for all 105/115 series cars. Approx 44mm diameter. See item code SU062 for an uprated version...
Uprated (shore 80 rating) rubber bush to fit the rear joint of the trailing arm to the back axle on all 105/115 series cars including Montreals. Approx 44mm diameter. Standard version of the bush...
Standard bush for the front joint of the rear suspension trailing arm (trailing arm to body joint) on all 1968 on 105/115 Series cars. Approx 50mm diameter. For earlier (pre 1968) cars with smaller...
Standard rear suspension trailing arm bush to fit pre-1968 cars which use a smaller bush on the arm to body joint. Bush approx 36mm diameter.
Classic Alfa production. Full set of polyurethane bushes to fit 34mm bush sized trailing arms fitted to most 750 Series cars. The 4 washers supplied are used on the bushes which go in the body...
Superflex rear trailing arm bush - fits into front mounting connected to the body. Suitable for track day and competition use. Two bushes required per car, sold as a pair.
Uprated (shore 80 rating) rubber bush to fit the rear joint of the trailing arm to the back axle on all 105/115 series cars including Montreals. Approx 44mm diameter. Standard version of the bush...
Uprated bush kit for the rear suspension on all 105 Series cars from 1967 onwards. Kit includes uprated trailing arm bushes, Superflex t-bar conical bushes and Superflex t-bar end thrust washers...
Set of 4 rear suspension rebound straps (inner and outer for each side) to suit all 105 series Saloons, Coupes and Spiders as well as Montreals. Also available is a fitting kit of metal plates...
Superflex polyurethane heavy duty shock absorber bush. Fits the upper section on front shock absorbers and top and bottom of the rear shock absorbers on all 105 Series cars. We...
Rebound straps mounting plate. 105 Series cars.
Here is a diagram showing the location of some of the parts in this category.
Set of 4 rebound straps to suit all 105 Series cars 1967 onwards. These are in the original canvas style. See item code SU075/2 for the version to fit pre '67 cars. Also see item code SU075...
Superflex polyurethane rear suspension T-bar end thrust washer. Two required per car, sold as a pair. Superflex only use very high quality TDI polyurethane as opposed to NDI polyurethane...
A pair/set of polyurethane Superflex T-bar conical bushes for the joint between the T-bar and the top of the differential. We recommend the fitment of Superflex bushes as they are much longer...