USED PARTS

Used, original vapour blasted intake manifold to suit 101 series 1600 Giuliettas and some early 105 series cars with a single carb. This manifold is in great condition with no corrosion at all, some of the studs and fittings may want...

Used, original, vapour blasted, intake manifold to suit 750 Giuliettas with a single carb. This manifold is in great condition with no corrosion at all, some of the studs and fittings may want renewing but the casting is in great shape.

Used, original cam cover to suit 1300 101 series cars. This cover may want sanding and refinishing for best results. Sold as seen in the photos.

Used, original cam cover to suit 1300 101 series cars. This cover may want sanding and refinishing for best results. Sold as seen in the photos.

Used, original cam cover to suit 1300 101 series cars. This cam cover has some marks where corrosion was removed, but is totally functional, please refer to the photos.

Used, original cam cover to suit 1300 101 series cars. We have a few of these in very similar condition so the one you receive may alter slightly from the photo. All of theses cam covers have been ice blasted so are free from corrosion and are in good...

Used oil filter cannister. We are unsure as to what specific model this fits as there have been so many variations in sizes over the years so please check your current cannister dimensions against the dimensions below before ordering: Diameter -...

Used Alfetta 2000cc crankshaft. Currently around 020 undersize. Could also be fitted to a 105 series car if the crank were drilled to accept a spigot bush.

Used crankshaft from a 2000cc Alfetta engine. Main bearing and big end bearing journals are both currently at 010 undersize. As well as 2 litre Alfettas, it will also fit 2 litre 105-series engines if the rear of the crank is drilled out to accept a...

Used 1750 MK2 cylinder head. In good condition but it will need a skim because the mating surface has some scratches. 111.6mm thick approx. More photos upon request.

Used Alfetta 1800 cylinder head. Good condition. 111.3mm thick.

Used 1750 cylinder head. In good condition with only very light corrosion. 11.8mm thick. More photos upon request.

Used 1750 MK2 cylinder head. Dirty but in good condition. 111.8mm thick. No cam caps. Front bungs missing (but we can supply). More photos upon request.

Used 1750 cylinder head MK2. Very dirty but in good condition. 111.9mm. More photos upon request.

Used 2600 block in good condition. Liner seats look good. Includes front cover.

Used 2600 block in good condition. Liners are still fitted. No front cover.

Used 2000 105 engine block. No front cover or main caps.

Used 1750 mk1 engine block. Liners still fitted. No front cover or main caps.

Used late 1600 engine block. Head studs and liner seats are in good condition. Includes front timing cover. Comes with all bearing caps, however the 5th main bearing cap is miss matched to the block.

Used block from a 1300 101. Excellent condition with good head studs and liner seats. Has been cleaned. Includes front timing cover.

Used engine block from a 2000 Alfetta. Includes front cover. Studs and liner seats look good with very little corrosion.

Used 1600 Alfetta engine block, type AR01600. Includes front timing cover. Could also be used on a 1600 105 series car if you weren't concerned about the engine number and oil filter type.

Used engine block from a late 1600 105-series engine with spin-on oil filter Type AR00526A. Includes timing cover but no main bearing caps.

Used 2000 Alfetta engine block, type AR01655. Complete with front timing cover. Could also be used on a 2000 105 series car if you weren't concerned about the engine number.