Clutch kit for 1900 cars. 2 piece kit comprising pressure plate and friction plate. Made in Italy. Please note this is the version with 34mm internal diameter of the release bearing. If you require the 38mm, please contact us . Fits early 1900 models including all 4 door cars. PLEASE CHECK WHETHER YOU NEED BORG & BECK TYPE OR SACHS TYPE CLUTCH. EARLY 1900 CARS (ALL SALOONS AND EARLY COUPES) USE BORG & BECK CLUTCHES, LATER CARS LIKE A CSS COUPE AND ALL 102 SERIES USE A FICHTELL & SACHS CLUTCH.
1900/102-027S CLUTCH KIT 2 PIECE - 1900 / 102 …
Clutch kit for 1900 and 102 series cars. 2 piece kit comprising pressure plate and friction plate. Made in Italy. For a release bearing see our part 1900/102-035. Fits late 1900 models and 2000...
£380.00
1900/102-038 CLUTCH RELEASE BEARING - 1900 & 1…
Clutch release bearing to suit 1900/102 series cars. This is the bearing only (not the carrier). Please check the dimensions of your current bearing against the dimensions below as there were some...
£165.00
1900/102-024 OIL PUMP REPAIR KIT 1900 + 102 EN…
Oil pump repair kit for 1900 and 102 series engines.
£205.00
1900/102-033 SPIGOT BUSH 1900/102/2600
Crankshaft spigot bush for 1900, 102 and 2600 engines.
£18.25
1900/102-023 1900 ENGINE MOUNT
Engine mount 1900.
£80.00
1900/102-035 CLUTCH RELEASE BEARING
Clutch release bearing for 1900 and 102 series cars. Fits 1900 models and 2000 Touring Spider / Bertone Sprint / Berlina.
£110.00
1900/102-100 CENTRE GRILLE 'HEART' 1900
Centre grille 'heart' to fit most 1900 models.
£490.00
1900/102-007 ENGINE OIL FILTER 1900
Felt oil to fit 1900 engines. Approximately 16cm long and 6.5cm diameter.
£18.00
1900/102-034 GASKET REAR DIFFERENTIAL 1900
Differential gasket for 1900
£13.00