75-MILANO PARTS : BRAKES

Front brake disc for 116 and 75 models from 1981 with 4 bolt wheels. Please check photos carefully before ordering. Sold singly. Please buy two.

ATE right front caliper, fitted to many 4 cylinder 116 and 75 models.

ATE left front caliper, fitted to many 4 cylinder 116 and 75 models.

Brembo right front caliper for GTV6 and 75 V6 models.

Brembo left front caliper for GTV6 and 75 V6 models.

Brake servo mostly fitted to GTV6 and 75 V6 models. Also fits RHD Montreal.

Brake servo for many 4 cylinder 116 and 75 models.

Front brake disc for some 116 and 75 models with 4 bolt wheels. Please check photos carefully before ordering.

Gasket for the inlet manifold vacuum valve fitted to most 4 cylinder 116 and 75 models.

Set of Ferodo DS2500 brake pads to suit Alfa 75 brembo front brake calipers. For the race version in DS3000 please go to the Race / Performance parts section of the website.

Caliper seal kit to fit Brembo caliper as fitted to Alfa 75 GTV6 (common upgrade to 105 series Alfa) - one kit does one caliper.

Caliper seal kit to fit all ATE front brake calipers - one kit does two calipers. Note, if you are splitting the caliper apart, this kit does not include the small internal 'O' rings in the calipers. These are sold separately under item code BR086. 2...

Steel spring clip to fit the dust seals on the 48mm diameter piston ATE front brake calipers fitted to all ATE braked 105 series cars and some 116 and 75 models. Should be used in conjunction with the kits available under item code BR035 or BR081. 2...

BREMBO Brake master cylinder 22mm - for all LHD cars with hanging pedals, 1970 onwards and RHD Spiders from 1984-93. Also fits post 1973 Montreals - LHD and RHD and all Alfetta transaxle cars (116 series). if you require the unions, please click on...

Brake master cylinder 22mm - for all LHD 105 series cars with hanging pedals 1970 onwards and RHD Spiders from 1984-93. Also fits post 1973 Montreals - LHD and RHD. Also fits many 116 and 75 models. if you require the unions, please click on...

Brake fluid reservoir for left hand drive cars from 1970 with hanging pedals. This is the later style also used on the Alfetta 116 series and has a blanked off side exit for this application. Aso fits some 75 models.

Brake system vacuum non-return valve, fits into the rear of the inlet manifold. Fitted to many 105, 116 and 75 models. Thread pitch M16x1,5. We understand early cars have a thread pitch of SAE 5/8-18 tpi.

Bonaldi servo sticker. Green & white, measuring 56mm X 19mm 

Brass brake union (male) M10 x 1 thread. This fits into the ATE calipers on all cars from 1968 onwards. Note that the remainder of the braking system uses 3/8 UNF threads.