75-MILANO PARTS : FUEL

We are taking delivery of 75 parts every week and will be adding them to our website as soon as they are unboxed and photographed.

Air intake hose 75 1.8 Turbo.

Intercooler hose/sleeve 75 1.8 Turbo

Fuel pressure regulator for S4 spiders and fuel injected, 4-cylinder 116 and 75 models.

Bush for the stay arm that supports the plenum on S4 spiders plus fuel injected 4 cylinder 116 and 75 models.

O-ring that seals the injector into the inlet manifold on fuel injected 105 (115), 116 and 75 engines, including GTV6 and 75 V6.

Mechanical fuel pump for 105 and 116 series carb engines with outlets to the top and side.

Mechanical fuel pump for 105 and 116 series carb engines with inlet and outlet pointing to the side.

Short air intake hose for GTV6 and 75 V6.

Air intake hose for some 75 TS models.

Air intake hose for some 4 cylinder 75 models.

Air intake hose for GTV6 and V6 75 models. Made in long lasting silicone.

Air intake hose for GTV6 and V6 75 models.

Plastic support bracket for some 4 cylinder 116 and 75 models.

Thackery washer, carburettor mounting. 5/16 - M8 fitting.

Gasket for the fuel pump mounted on the lower front timing cover on carburettored 101 Normale and 105 Series cars plus 116 and 75 models with carbs.. There should be two gaskets fitted - one either side of the plastic insulating spacer block...

Aluminium blanking plate to seal off the mechanical fuel pump mounting on carb equipped 101, 105, 116 and 75 models. This is used when fitting an electric fuel pump to the car.

Plastic mounting spacer to suit mechanical fuel pumps mounted down on the front timing cover of the engine. Fitted to most carburettor equipped 101, 105, 116 and 75 models.

Fuel filter for all 75 1.8 Turbo models.

Fuel filter for all 75 2.0 Twin Spark models.

Useful in-line universal fuel filter that can serve as additional fuel filtration or as a cheap replacement for the original filter unit. Suitable for all carburettor-equipped models.

Bosch in-line fuel filter to suit fuel injected Spiders 1987-93 and fuel injected 116 and 75 models, including V6.

Inlet manifold gasket to suit Bosch fuel injected Spiders from 1988-93 plus some fuel injected 116 and 75 models (not TS or V6).

45mm paper carburettor gasket. Note, unmodified cars will use the 40mm gasket instead (FL021).