Used handbrake lever assembly from a late S3/S4 spider. This handbrake will fit any 105 series car post 1968 but may not be the correct colour or handgrip.
The mechanism in the lever is working. However, it is missing the bolt through the base of the arm that locates into the bracket so this would need to be used from your current handbrake as well as the locating lug for the ratchet arm.
Handbrake grip to fit all 105 Series GTs/GTVs, Saloons and Spiders with central handbrake levers up to 1984. Classic Alfa production
Handbrake lever assembly to fit the handbrake mechanism on ATE braked cars where the cable attaches to the handbrake mechanism.
Used heater matrix to fit late 105 series cars. Untested but complete. Plastic casing has a crack as detailed in the pictures.
Used air filter trough to suit later 105 series cars with the tubular style air filter box.
Used crankshaft from a 1750cc 105 series engine. Big end and main bearing journals are 010 so plenty of scope for a regrind to 020.
Used centre heart to suit all 105 series Berlinas. This centre heart will need some cleaning up and possibly re-chroming.
Handbrake lever button. Please note the pilot hole has been drilled, but will require finishing by customer for the correct pin diameter (it is made as a low volume 3D printed part).
Handbrake lever buffer. See second pictures for fitting position.