Clevis pin. For multiple applications. Please check the dimensions you need before ordering.
Diameter: 9.4mm
Length: 30mm
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
Clevis pin for all clutch master cylinders from 1963-93. Diameter: 7.8mm Length: 24mm
Clevis pin for handbrake side cable. Used in conjuction with BR055 and BR056 Diameter: 8mm Length: 28.4mm
Valve guide to fit performance valves with 9/32" diameter valve stems. Can be used on both inlet and exhaust valves.
1" brake master cylinder to suit all 750 Series and 101 Series cars with front drum brakes. Please note – This cylinder was made for Giulietta 750/101 cars which use a union connection. To use this...
Heater motor with fan a 15.3cm diameter fan amd a base fitting of 85mm (see photo) to generally suit the later style heater unit found on Spiders from about 1970 onwards. Note that different...
FISPA decal to fit on the top of the air box, normally used on 105 series cars, using air filter EN051.
Early rear suspension bush kit standard - For cars from 1964-1967. Kit comprises: Trailing arm bushes rear Trailing arm bushes front (36mm diameter). T-bar conical bushes Anti roll bar bushes Anti...
Air filter housing fitted to all early 105 cars with crossover air hose. For the corresponding air filter please see EN050.
Here is a diagram showing the location of some of the parts in this category.
Bush set for the mechanical clutch pedal pivot arm shaft, for left-hand drive standing pedal 105 series cars 1964-69.
Front brake disc backing plate right, 1300 1600. Not suitable for 1600 Spiders produced from 1986 to 1993 as these were fitted with the larger front calipers from the 2000 cars, see part BR057...
Original style canvas rear axle check strap set one long one short, to suit all 2600 & 2000, 106 & 102 Series cars. Two sets required per car.
Set of three rubber stoppers for the pedal box on left-hand drive standing pedal 105 series cars 1964-69.
Clutch pedal return spring for all hydraulic clutch right hand drive cars with standing pedals. Fits in the pedal box. Original Alfa part number is 105.49.44.105.00 This spring is usually either...
Rubber seal to fit between the pedal housing and the bodywork on all left hand drive 105/115 Series cars with hanging pedals.