Categories

Replacement Italian made 101 Series Sprint headlining kit done in the original material, great quality, will require trimming for a perfect fit. If you require this material by the metre, please see 101-427.

Spider interior rear view mirror to suit cars without the integral courtesy light - 1983 onwards. Will fit cars that have the inbuilt courtesy light, but does not have provision for the light. If you also need the mounting plate for this mirror...

Complete Altissimo Spider rear light unit for Spiders 1970-83 - To fit right hand side when viewed from the rear of the car. Includes Altissimo branded lens and body, rubber gasket/seal and 'tube nuts'.

Complete Altissimo Spider rear light unit for cars 1970-83 - left hand side when looking from behind the car. Includes Altissimo branded lenses and body, rubber seal/gasket and 'tube nuts'.

'Giulia Sprint GTA' bootlid script badge. Uses 3 threaded mounting pins to affix to the bootlid.

Gearbox synchro sleeve to fit all 105 series models plus 116 and 75 series cars. These can also be used on 101 and early 105 gearboxes with mechanical clutch even though originally they had a sleeve with a 101 part number. .

Original style rear spoiler kit for series 3 Spiders from 1984-89. This kit comes in black and contains 3 pieces.

13mm lift, 307 degrees duration. Hollow billet lighweight camshaft designed by CatCams in Holland, suitable for 2 litre Nord engines wanting lots of power. Please note that with these performance camshafts it will be necessary to make a simple...

Spesso heavy duty competition/race head gasket to suit 2000 twin spark engines. Much harder than stock head gaskets and able to withstand greater heat and higher compression of racing engines. 1.6mm thickness

Spesso heavy duty competition/race head gasket to suit 101 and 105 series 1750cc engines. Much harder than stock head gaskets and able to withstand greater heat and higher compression of racing engines. Comes with 6 Viton o-rings. 1.6mm...

Rear halfshaft oil seal, for 102 and 106 series cars. 

Rubber/metal seal for the front upper wishbone bushes on early 750 Series models. 32mm OD and 24.5mm ID.  Fits the upper wishbone bushes on the following 750 models (8 used per car): Berlina to chassis #1488.20800Sprint & Sprint Veloce to 14963...

Rubber/metal seal for the front wishbone bushes on 1900, 2000 and 2600 cars as well as 750 and 101 Series models. Fits the lower wishbone bushes on the following 750/101 models (8 used per car): Berlina to chassis #1488.20800Sprint Sprint...

Rear wheel bearing to fit 102 Series 2000 cars and 106 series 2600 cars.

12mm lift, 290 degrees duration. Hollow billet lighweight camshaft, a good alternative to EN524 if you want better low end power with just a small amount less at the very top. Suitable for 2 litre Nord engines wanting lots of power but with clean low end...

Foot operated headlight dip switch to fit 750 and 101 Series Spiders. Original Lucas.

Rear screen seal to fit all 750 and 101 Series Sprint Speciale.

Complete right rear wing/fender to fit Sprint GTs, Sprint GTVs and Giulia GTCs from 1964-67 with the 'low' style wheel arch. Some late Sprint GTVs use the later "high" rear wings so please check carefully before ordering.

Complete rear wing/fender to fit Sprint GTs, Sprint GTVs and Giulia GTCs from 1964-67 with the 'low' style rear wheel arch. Some late Sprint GTVs use the later "high" style rear wings so please check carefully before ordering.

10.8mm lift hollow billet lightweight camshaft with 285 degrees duration at 0.30mm tappet clearance (254 deg. at 1mm lift). Designed by leading UK Alfa competition engine builder Jim Evans, whose experience and knowledge is second to none, this is an...

Front suspension spring made to the specifications of our popular 'fast road' front spring, but with greater length - close to standard ride height - to make it ideal for historic rallying cars. Can be combined with the Classic Alfa Handling Kit...

Sealing ring (approx 45mm OD) that fits between the steering idler and steering arm on 750, 101, 102 (2000), 106 (2600) and 105 Series cars. May also be fitted between the steering box and steering arm on some cars. Also used as a lower...

Bottom oil seal for the steering box on all 750 and 101 Series cars.

Complete reproduction tail light unit to suit Spiders 1970-83. Right hand side as viewed from the rear of the car.   Includes wiring and 'tube nuts' for mounting. Does not include gasket/seal available separately as a pair under code LT091.