Categories

Choke cable to suit all carburetted Spiders 1970-87 with the choke cable mounted in the centre console. The replacement choke cable for other models is available under item code FL036. The cable is a solid wire and provided with an extra...

Plastic trim strip that goes along the top edge of the door inside the stainless steel trim strip on late Series 3 and all Series 4 Spiders. Two per car. Note that these parts are 'handed' (i.e. different left to right). Right hand side can be found...

Rubber strip with flocking/felting to go on the outside of the door glass on all Spiders 1966-93. Two required per car.  

Front brake cylinder seal kit to suit 101 series cars with 3 shoe front brakes. One set does both front brakes. ** NOTE ** - This seal kit is for original brake cylinders. It will not fit reproduction units such as our product 101-006.

Complete set of four front inner wheelarch splash panels to suit all Spiders 1966-83. Made from aluminium so that they don't rust!

Spider splash panel rear right - behind front wheel, now made in aluminium to avoid corrosion.

Spider splash panel rear left - behind front wheel, now made in aluminium to avoid corrosion.

Spider splash panel front left - in front of wheel, now made in aluminium to avoid corrosion later.

Spider splash panel front right - in front of wheel, now made in aluminium to avoid corrosion later.

Giulia GTC bootlid script badge

Plastic "2.0" script for rear of Series 4 Spiders 1990-93. Requires adhesive to fit. We recommend a decent automotive double sided tape, or specialist adhesive film to affix the badge to the car.  

Plastic "Spider" script for rear of Series 4 Spider 1990-93. Requires adhesive to fit. We recommend a decent automotive double sided tape, or specialist adhesive film to affix the badge to the car.  

Chrome plastic Alfa Romeo rear script for Series 4 Spiders 1990-93. Requires adhesive to fit. We recommend a decent automotive double sided tape, or specialist adhesive film to affix the badge to the car. Overall Height - 5cm Width - 24.1cm

Aluminium GTA door skin - right side of car

Aluminium GTA door skin - left side door

GT splash panel rear right, now made in aluminium to avoid corrosion later.

GT splash panel rear left, now made in aluminium to avoid corrosion later.

GT splash panel front right, now made in aluminium to avoid corrosion later.

GT splash panel front left, now made in aluminium to avoid corrosion later.

Set of 4 screws to fit the smaller tail light units fitted to 1300, 1600 & 1750 GT/GTV models. Kit includes 1 x 33mm screw, 1 x 27mm screw and 2 x 25mm screws. May also fit some saloon rear lenses as well. Note, from our research, Saloons may use the...

Bolt for rear suspension trailing arm. Goes through the bush at the rear of the arm and connects the rear anti-roll bar to the suspension. 2 required per car.

Propshaft centre support bush and bracket to suit Hydraulic clutch models 1968 onwards. Holds the centre support bearing available separately under code GB030, which is retained by a circlip also available under code GB030/1.

Front gearbox to bellhousing oil seal - to fit cars with hydraulic clutches.

Front gearbox to bell housing oil seal to suit mechanical clutch 750/101/102/105 cars and all 2600 (which are hydraulic clutch). NOT suitable for early "split case" 750 gearbox.