Categories

Small (26mm / 1 inch) enamel badge for the Sprint dashboard radio blanking plate.

Carello style clear sidelight lens to fit Giulia saloons with two piece front sidelight lenses. Overall length approx 60 mm.  See part number LT113 for the matching amber section.

Carello style amber indicator lens to fit Giulia saloons with two piece front lenses. Overall length approx 90 mm.  See part number LT113/1 for the matching clear section

Steering wheel hub adaptor with collapsable section to fit Series 4 Spiders 1990-93. Suitable for both Nardi and Momo style aftermarket steering wheels. Not suitable for cars fitted with an airbag.

Steering wheel hub adaptor to to enable both Momo and Nardi style aftermarket steering wheels to be fitted to late Series 3 Spiders 1986-89.

Late style rectangular brake fluid reservoir Suitable for the following cars: RHD 105 Series cars - 1968 onwards LHD 105 Series cars - 1968-70 (with hydraulic clutch and single circuit brakes) On early single circuit cars with one brake servo,...

Seat rail support bracket to fit all 105 Spiders 1966-93. Please note, Roundtail Spiders (1966-70) require two brackets per side. On all Spiders from 1970 to 1993, you will require one bracket per side, then you will also require ST218 x1 and...

Side window rubber/scraper to fit all Montreal doors. Sold in 1.3m lenghts. 

Bonnet/hood release spring to fit all 750 and 101 Series Spiders.

Earth strap to fit the carburettor mounts on all 105 Series carburettor cars. Often missing or damaged on many cars we see, ideal to replace when you fit new carburettor mounts.

Small nylon bush/plug that fits inside the 'top hat' bush (part GB043/1) that fits into the front of the propshaft and receives the output shaft from the gearbox. Used on 750, 101 and 105 Series cars.

Windscreen seal to fit all 750 and 101 Series Sprint Speciales.

Propshaft universal joint to fit 1900, 2000 (102 Series) and 2600 (106 Series) cars.

Pair of black carpet overmats to fit left hand drive Roundtail Spiders 1966-70.

Triangular exhaust gasket to fit Montreal exhaust systems. Two required per car. This gasket will also fit EX009/2 for late S2 S3 spiders with catalysts.

Clutch master cylinder repair kit to fit Bonaldi master cylinders fitted to all 105 Series cars with standing pedals (LHD cars to about 1970 and all RHD cars). Will not fit ATE cylinders.

Right rear side floor pan to fit later Giulia saloons.

Left rear floorpan section to fit later Giulia saloons.

Bottom radiator hose to suit 1900 and 102 Series 2000 engines. Please see WA083 WA084 for the correct Romablok clamps to fit either end of this hose.

Top radiator hose to suit 1900 and 102 Series 2000 engines.

Top quality Italian made 5mm ignition lead set to suit 2600 engines. Includes coil/king lead and original style connectors.

Bottom radiator hose to suit 2600 Sprints and Spiders.

Top radiator hose to suit 2600 engines.

Air filter to carburettor air intake plenum hose/elbow to suit Veloce cars.