Categories

7mm thick aluminium spacer for the front spring on all 105 Series cars. Fits into spring pan.

Rubber seat for front spring, Two fitted per front spring, four per car.

Metal seat for front spring. Two used per front spring, four per car.

Adaptor elbow to enable you to use the Airflow Tester (available under item code FL024) more easily on sidedraft carburett

Schleyer carburettor airflow tester/synchrometer - used to check the airflow through each carburettor to assist you in balance the flow across multiple carburettors. Use in conjunction with the adaptor elbow under available under item code FL024/1 which...

Propshaft bolt - 13mm head and 9mm shank. Note that these bolts (8 required per car) are only suitable for later model cars with 9mm holes in the propshaft ends. Earlier cars use a slightly smaller bolt. See part number GB032 for a matching Nylock nut...

13mm nylock nut to suit the propshaft bolt, available under code GB033. 8 required in total per car - 4 each end of the propshaft.

Input shaft bearing to suit later style hydraulic clutch gearboxes, where the input shaft is retained by a large nut - not a circlip like earlier style gearboxes. Inside diameter 30mm, outside diameter 62mm, width 23.8mm. See GB004 for the input bearing...

Input shaft bearing to suit mechanical clutch cars (inc. 101 series) and early hydraulic clutch cars where the input shaft is retained by a circlip. Also fits late 102 series and all 2600 (106 series). Dimensions: Internal diameter - 30mm Outside...

Radiator cowl/shroud to fit all carburettored 105 Series non-Stepfront Coupes, Saloons & 1300 1600 1750 and 2000 Spiders from 1968 onwards. Does not fit Stepfront GTs or 1600 Roundtail Spiders that used a metal cowling.

Radiator fan to fit 105 Series 2000 engines.

Radiator fan to fit 1300, 1600 & 1750 engines. Also suitable for 101 Giulia.

Heater facia panel to fit Roundtail Spiders & some Giulia saloons.

Oversize (14.10mm) exhaust valve guide to suit all 4 cylinder 101, 105, 116 and 75 engines, plus Montreal - with 9mm valve stems. Not TS. Sold individually.

Oversize (14.10mm) inlet valve guide to fit all 4 cylinder 101, 105, 116 and 75 engines - plus Montreal - with 9mm valve stems. Not TS. Sold individually. Note, these can also be used as an exhaust valve guide if you wish to fit valve stem seals on...

Tab washer 5th main bearing cap 101 & early 105 (1300 & 1600)

Tab washer for the nut that holds on the front crankshaft pulley for all 4Cyl Spica equipped models. We recommend you replace any tab washer once it has been used more than once. Alfa Romeo OE part number 105.50.02.104.00

Beautifully made grey pair of inner door panels to suit all Sprint GTs and GTVs as well as GT Juniors and 1750 GTV Mk 1 models. Done in the correct style and material.     

Beautifully made ochre pair of inner door panels to suit all Sprint GTs and GTVs as well as GT Juniors and 1750 GTV Mk 1 models. Done in the correct style and material.  Rear panels available under IN150/1 SPRINT GT/GTV/GT JUNIOR/1750 MK 1 INNER REAR...

Conrod nut tab washer for all 101 and 105 series twin-cam 1300 engines. Two required per conrod, 8 in total per engine. We recommend you replace any tab washer once it has been used more than once.  

Standard exhaust manifold to suit Bosch injected Series 4 and late Series 3 Spiders 1989-93. This manifold replaces the middle (cylinders 2 3) manifold that can crack in some circumstances. The standard manifold to cover the outer cylinders (1...

Black carpet set to fit a left hand drive Mk 1 1750 GTV (up to 1970) with standing pedals and centre console. Available in the full length style only.  This carpet is rubber backed and can be hard to fold and glue. Ideal for track cars or someone who's...

Steel bootlid frame to fit the bootlid on all GT/GTVs 1964-77 (except GTCs)

Dust cover for the small ball joint that is the upper ball joint on the front steering/suspension on all 750 & 101 Series cars.