Categories

GTA 55mm bore centre exhaust section to suit all GTs/GTVs. Made in Italy by IMASAF - OE Quality steel exhaust systems since 1954! This system will require two of the larger gaskets and one larger...

Differential pinion outer (front) bearing to suit the larger pinion fitted to limited slip differentials found in 2000cc cars. Internal diameter 33.3mm, OD 68.26mm, width 22.2mm. 

Pertronix electronic ignition kit - for later cars to replace 1 piece Bosch points, delivers twice the power to the spark plugs, reliable starting every time! Uses Hall effect magnetic sensor in place of the points and unlike optical systems it isn't...

Rev/tacho cable for left hand drive 105 series cars. 1.55m long, it will also suit some 750 & 101 series cars as well. For LHD speedo cable, see part number EN087.

Speedometer cable for all right hand drive 105 series cars. 2.0m long, it will also fit 750 & 101 series cars in need. For a suitable cable for left hand drive cars, see EN087.

1.85M long. Used as the speedometer cable for LHD cars and as the rev/tacho cable for RHD cars. Fits all 750, 101, 105 series cars. Check the length of your old cable! See part EN103 for the rev/tacho cable for LHD cars and EN088 for the speedo cable...

A set of assorted engine tab washers for camshafts, crank pulley, main bearing caps and 5th main bearing cap (later 2 piece style). Fits 4 cyl 101, 105, 116 engines. Some of the washers are used in the Montreal V8. We recommend you replace any tab washer...

Ignition lead clamp to suit 750/101 series Sprints and Spiders. This clamp replaces the original style clamp that was part of the jubilee clip onto the inlet manifold.

Aluminium blanking plate for the rev counter drive. will fit 101 1600 cars plus 105 and 116 series cars with cable driven rev counters. 

3 way brake union to fit on the rear axle of all 105 Series cars including Montreals. Alsp fits some 750 and 101 Series cars. This hoses are compatible with 3/8 UNF unions under the code BR323

High tension spark plug lead set to suit earlier 105 cars (1964-67) and all Giuliettas 750 & 101 (1955-1963) with the ignition coil mounted near the distributor in the engine bay. Produced in original style green colour thin wire ( 5mm ).

GTA 55mm bore tailpipe without silencer. Made in Italy by IMASAF - OE Quality steel exhaust systems since 1954! Uses O-ring gasket EX082. Works in conjunction with the rest of the GTA system - exhaust manifold available under item code...

Larger 55mm bore tailpipe with silencer to suit GTA exhaust systems. Made in Italy by IMASAF - OE Quality steel exhaust systems since 1954! Uses o-ring gasket EX082. Should be fitted in conjunction with the rest of the GTA system - exhaust...

Glovebox to suit all 2000 GT style dashboards, left and right hand drive. This includes late GT Juniors with the 2000 style dash. This glovebox has a great finish with an internal flocking as original.

Glovebox to suit all 1750 GT style dashboards, left and right hand drive. This includes 1750 mk1/mk2 as well as GT Juniors with the 1750 style dash. This glovebox has a great finish with an internal flocking as original.

Halfshaft castle nut to suit all Montreals. Specific to the Montreal. Two required per car

Handbrake cable to fit all Giulia saloons with under dash handbrake lever and rear brake discs.  

Protection cover for the fuel tank sender. Will fit all 105 Series cars. Please note this is made of black rubber, whereas the original type was made of a dense foam material and had an internal metal spine.

Wiring loom to suit a left hand drive Roundtail 1750 Spider Veloce 1968 to 69. PVC cables with correct style connectors and taped/PVC outer sleeves for protection. Product images are for illustrative purposes only and may differ from the actual...

Small sized (13-20mm) stainless steel hose clamp/jubilee clip for general application on heater hoses etc.

Original style "Romablok" hose clamp kit. 1750 cars with alloy T piece.  Please note, some sizes are made by different manufacturers and will differ in color. Some will be gold and some chrome. Please see picture.  Sizes supplied  X8 37-41.5mm X2 30mm X4...

Original style "Romablok" hose clamp kit. Cars with drop in thermostat.  Please note, some sizes are made by different manufacturers and will differ in color. Some will be gold and some chrome. Please see picture.  Sizes supplied X4 37-41.5mm X2 30mm X4...

Original style "Romablok" hose clamp kit. Cars with early screw in thermostat.  Please note, some sizes are made by different manufacturers and will differ in color. Some will be gold and some chrome. Please see picture.  Sizes supplied  X1 52-56.5mm X3...

Original style "Romablok" hose clamp 17-19mm.