Categories

Lucas coil sticker HA12 12V. Measuring 80mm X 28mm  

Magneti Marelli SUPERPOTENTE gold coil sticker. Measuring 65mm X 41mm ( at centre ) 

CMR wheel stickers set of 5. Measuring 25mm

Fergat wheel stickers set of 4, clear background. Measuring 52mm X 19mm ( at centre ) 

Borrani Ruote, set of 4 stickers , measuring 16mm 

A. Salamini & Co. radiator sticker,  measuring 52mm X 21mm ( at centre ) 

Agip servizio sticker, measuring 55mm X 65mm

Agip sticker, measuring 100mm X 45mm

Two Magneti Marelli stickers, each measuring 50mm X 25mm ( at centre )

750/101 Series Spider rear number plate mounting plate, chrome as original.

High tension spark plug lead set. With long king lead to suit 105 series cars with the coil located on the bulkhead and most 4 cylinder 116 models. 7mm PVC outer with low-resistance copper-strand core. If silicone is required, see IG003/1. If you...

Pair of 101 Series Sprint rear number plate light supports, chrome as original.

Pair of brackets for 750/101 Series Spider rear number plate supports/posts, chrome as original.

Differential bottom oil pan gasket to suit all 105 series 1300 / 1600 / 1750 cars as well as 750/101 models . For non-limited slip axles.

Copper fluid feed line from the master cylinder to the flexi hose bracket on the back of the engine bay crossmember on all right hand drive, standing pedals 105 Series cars. Complete with correct unions already fitted. See CL031 for the matching pipe...

Copper fluid feed line from the clutch fluid reservoir to the clutch master cylinder to fit all standing pedals right hand drive cars. See also CL032 for the line from the clutch master cylinder to the flexi hose joint. Also available in cupro-nickel...

Small curved FISPA decal to fit on the top of the large oval shaped 'crossover' style air filter unit found on most 105 Series cars to about 1970.

Small mounting block for the side of the rear bumper where it attaches to the rear wing (fender) on all 750 & 101 Series Spiders. 2 per car. Now produced in billet aluminum. 

750/101 Series Spider rear number plate support/post, chrome as original.

Polished stainless steel trim piece that holds down the boot mat as fitted to all Coupes from about 1966 onwards. This piece goes of the right side of the boot (trunk) opening. See item code CH062 for the matching part for the left hand side. For early...

Polished stainless steel trim piece that holds down the boot mat as fitted to all Coupes from about 1966 onwards. This piece goes of the left side of the boot (trunk) opening. See item code CH063 for the matching part for the right hand side. For early...

Large bore 60mm sport exhaust system - full length from manifold/headers to tail pipe. Designed to fit 1750 & 2000 GTV models, as well as other GTs fitted with 2000 engines. This system is now produced in high quality stainless steel. Also see...

Differential bottom oil pan gasket to suit the limited slip axles found in the 2000 range.

High tension spark plug lead set. With long king lead to suit 105 series cars with the coil located on the bulkhead and most 4 cylinder 116 models. 7mm red silicone outer insulation with a spiral-wound resistive core. Ideal for use in both "points"...