Categories

Complete left side floor ( front and rear section ) 101 Spider 

Complete right side floor ( front and rear section ) for 101 Spider 

Transverse chassis frame piece, right side for Spider, Sprint and Ti ( 750 & 101 cars ). This is the piece where the front jacking point welds onto. 

Transverse chassis frame piece, left side for Spider, Sprint and Ti ( 750 & 101 cars ). This is the piece where the front jacking point welds onto. 

Fuel sender cover  to fit 750 & 101 Giulietta/Giulia Sprint & Spider boot floor. 

Rear vinyl 'seat' cover to suit Series 2 Spiders from 1970-78. Beautifully made in the correct material and pattern. Burgundy also known as Bordeaux red to match our burgundy front seat covers and door panels. If you need some extra vinyl please...

Boot/Trunk floor to fit both 750 & 101 Giulietta/Giulia Spider and Sprint. Please note the tank support legs will need to be welded on. Also, the hole for the fuel filler for all Spider models will require to be cut. 

Pair of air filters, Sport design for better breathing. Will fit all Montreals. Made in Italy.

Aluminium rear spring shim/spacer to fit all 105 Series Saloons, Coupes & Spiders. Used to adjust the rear ride height on cars from the factory. Sold individually, two used per car - sitting up on the top of the rear spring underneath the shock...

Rear spring shim/spacer 11.5mm to fit all 105 Series Saloons, Coupes & Spiders. Used to adjust the rear ride height on cars from the factory. Sold individually, two used per car - sitting up on the top of the rear spring underneath the shock...

Bush for the vertical steering arm/pin on the front suspension of 1900, 102 Series 2000 and 106 Series 2600 models. Two bushes used per side, four per car. Sold separately

Suspension bush to fit the front upper and lower control arms on 1900, 102 Series 2000 and 106 Series 2600 models. Sold separately, 8 bushes used per side, 16 per car. See 1900/102-061 for the bush to fit the vertical steering pin, 1900/102-062 for the...

Pair of rubber grommets to fit the the firewall where the heater hose passes through on all 750 and 101 Series cars.

Bonnet/hood spring plate to fit all Giulia saloons.

Right side rear jacking point to fit late Series 3 and all Series 4 Spiders. Note that the hole in the side of the jacking point should go towards the front of the car.

Left side rear jacking point to fit late Series 3 and all Series 4 Spiders. Note that the hole in the side of the jacking point should go towards the front of the car.

Rear right side jacking point to fit all Spiders 1966-87. Note that the hole in the side of the jacking point should go towards the front of the car. For the matching part to fit the left side of the car, see part number ST053...

Two piece rear carpet section in black carpet to fit Spiders 1989-93.

Two piece rear carpet section in tan carpet to fit Spiders 1989-93. Please note, the shade of colour is not exactly the same as original and most cars original carpets have also faded unevenly due to sunlight exposure.

Central rear exhaust hanger to fit Montreal exhaust systems.

Brake pad pin/spring set to fit the Girling front disc brakes on 101 Series Giulias and also the front and rear brakes (where fitted) on 106 Series 2600 cars.

110 cm long (approx 80mm internal diameter) fresh air ducting hose to fit 750 & 101 Series Sprint Speciales and on one side of some 101 Series Spiders. Produced in the correct rubberised cloth style with wire spiral binding.

80mm diameter fresh air ducting hose. This part is 60 cm long approximately and is used on one side of the 101 Series 1600 Spider for fresh air ducting and may also be used on other models as well. The other side of the car uses the 80cm length hose...

Special 8 bolt hole propshaft 'doughnut' coupling to suit 1900 cars and 102 Series 2000. These cars also use the normal 6 bolt hole coupling on the centre, which is available under code GB031.