The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
Heater valve for Alfetta models.
Heater hose grommet for Stepfront Sprint GT, Sprint GTVs, GTAs, GTCs, Roundtail Spiders and Giulia sedans up to the late 1960s.
Also fits many 116 and 75 models.
Small rubber gasket/seal to suit the later style heater valve (part number WA020) where it attaches direct to the heater matrix.
Hose for heater valve to matrix, for early heater boxes. Please note it will require cutting to size.
Gasket for the inlet manifold vacuum valve fitted to most 4 cylinder 116 and 75 models.
Non-return valve for the servo as fitted to all 116 models.
Later style heater valve that attaches direct to the heater matrix. Suitable for cars from about 1968 onwards (including Montreal), depending upon when the model changed over. This style valve has...
Heater matrix/core to suit all later style heaters from about 1968 onwards.
See WA058/1 for (thicker) maxtrix for earlier style heaters.
Note that the changeover year is only...
Heater matrix/core to suit earlier style heaters fitted to 105 series cars up to 1968. Approx 6 cm/2.5 inches thick on the sides with a 32mm thick core. Note that the changeover year is...
Short hose on the thermostat housing for GTV6 and 75 V6.
Thermostat for the GTV6 and 75 V6.
Suits all roundtail and Series 2 Kammtail Spiders. Includes the Carello logo moulded into the cover. Left side only
metal bracket/strip for the rubber seal (available under code RB012) that goes down the outer edge of the 'B' post on all 105 Series Coupes. Replace the rusty metal strip on your car when you...
Courtesy light switch for all Giulia saloon and Berlina 1750 & 2000.
Beautifully made inner door trim panel to suit the 1750 GTV Mk 2. Done in the correct style and skai black material and includes the heat pressed trim lines and chromed strip as well...
Front wheel stub axle nut, left hand thread. To suit all 750, 101 and 105 Series cars.