Starter ring gear with 130 teeth to suit Fuel Injected engines from 1986 onwards.
** NOTE ** - This is different to item code EN086 for carburettor cars. This ring gear has a bigger internal diameter of 250mm instead of 230mm for flywheels from carburettor cars.
Starter ring gear with 130 teeth to suit all hydraulic clutch 2000 engines with carburettors. If you have a fuel injected car, see item code EN086/1 for USA spec cars (131 teeth) or...
Starter ring gear with 131 teeth. Usually found on fuel injected USA specification engines. ** NOTE ** - European specification fuel injected engines use a ring gear with 130 teeth available under...
Starter ring gear with 110 teeth. Suitable for all hydraulic clutch 1300, 1600 & 1750 engined cars.
Starter ring gear 105 teeth - suitable for all mechanical (cable) clutch cars including Giuliettas.
Gear Dog Ring or syncronizer hub for all 105 and 115 series transmissions after 1968. Fits 2nd through 5th gears. Dog rings are frequently worn and can cause gear grinding even when synchros...
GT glovebox lock. Suitable for cars made from 1968 onwards. Not suitable for GTs with flat dashboard.
Propshaft universal joint to suit 105 series cars (not Montreals) from 1968 onwards. Roller cage is 24mm in diameter. Earlier cars (750, 101 and 105 Series to 1968) with the earlier style propshaft...
Heater matrix/core to suit all later style heaters from about 1968 onwards. See WA058/1 for (thicker) maxtrix for earlier style heaters. Note that the changeover year is only...
Water pump for the 75 V6 1989 onwards Not suitable for the Zagato V6 SZ & RZ For V6 pumps with the pressed on pulley, please see D0349 Please compare pictures to your water pump carefully,...