GB043/1 PROPSHAFT 'TOP HAT' BUSH

Small nylon bush/plug that fits inside the 'top hat' bush (part GB043/1) that fits into the front of the propshaft and receives the output shaft from the gearbox. Used on 750, 101 and 105 Series cars.

Small rubber 'bush' that fits over the nose of the propshaft where it slots into the back of the gearbox on 750, 101 and 105 series cars. Fits against the 'Top Hat' bush in the back of the...

Propshaft top hat bush 75 models.

Propshaft centre bearing retaining circlip. Used on all 105 series cars which use the later style propshaft mount (GB028 GB029). We recommend replacing the circlip when you fit a new centre...

Here is a diagram showing the location of some of the parts in this category.

Plastic 'top hat' style badge clips to attach the script badges, Pininfarina shields and other style badges to the bodywork. Alternative to the spring steel and plastic badges available under code...

13mm nylock nut to suit the propshaft bolt, available under code GB033. 8 required in total per car - 4 each end of the propshaft.

Uprated heavy duty version of GB031, made with harder grading of rubber, suitable for fast road or competition use on all 750, 101, 102, 105 and 106 series cars. Use in conjunction with the...

Propshaft bolt - 13mm head and 9mm shank. Note that these bolts (8 required per car) are only suitable for later model cars with 9mm holes in the propshaft ends. Earlier cars use a slightly smaller...