GB096 PROPSHAFT BOLT (8 mm)

Propshaft bolt - 13mm head and 9mm shank. Note that these bolts (8 required per car) are only suitable for later model cars with 9mm holes in the propshaft ends. Earlier cars use a slightly smaller...

13mm nut to suit the 8mm propshaft bolt, available under code GB096. 8 required in total per car - 4 each end of the propshaft.

Front coupling bolt to fit all 750, 101, 102, 105 and 106 series cars except Montreals. If you require the nut, please follow this link SU202 M12 NYLOCK NUT

New propshaft rear half, including sliding spline to suit all GT/GTVs from 1964 - 1976. Note that this shaft has 9mm bolt holes on the flanges at each end to suit cars from early 1970s onwards...

Here is a diagram showing the location of some of the parts in this category.

New propshaft rear half, including sliding spline to suit all GT/GTVs from 1964 - 1976. Note that this shaft has 8mm bolt holes on the flanges at each end to suit cars up to the early...

13mm nylock nut to suit the propshaft bolt, available under code GB033. 8 required in total per car - 4 each end of the propshaft.

Special 8 bolt hole propshaft 'doughnut' coupling to suit 1900 cars and 102 Series 2000. These cars also use the normal 6 bolt hole coupling on the centre, which is available under code...