Applying Dynamat to panels, doors eliminates panel distortion by transforming the flimsy sheet metal into a solid non-resonant baffle. Dynamat improves stops vibration rattles and squeaks. The Xtreme Bulk Pack controls vibration four times better than Dynamat Original and requires no heat for installation, which makes Dynamat Xtreme a great choice for do-it-yourselfers. Use Dynamat Xtreme for rear decks, doors, floors and boot floors. Unlike Dynamat Original, Dynamat Xtreme is also recommended for boot lids, roofs, quarter panels and under-bonnet installations. Kit contains nine 18" x 32" (457mm x 812mm) pieces of Dynamat Xtreme.
IN216/1 DYNAMAT SUPERLITE SOUND DEADENING 12 S…
Dynamat SuperLite is a high-efficiency sound dampening material used to stop noise and vibration in your automobile. It is the same sticky butyl rubber Constrain Layer Damper (CLD) as Dynamat Xtreme...
£205.00
IN159 SOUND DEADENING MATERIAL - ORIGINAL STYL…
Sheets of the original style sound deadening material as fitted to most 105 Series vehicles. Sheets measure 50 x 100cm and are made of heavy duty bitumen style material with a thick felt backing...
£13.50
IN339 BULKHEAD SOUND DEADENING LATE 105 GT
Inner bulkhead sound deadening to suit all 105 hanging pedal GTs and all hanging pedal GT Juniors. These sound deadening mats are perfectly cut to shape to make for an easy installation.
£110.00
IN340 FULL SOUND DEADENING KIT LHD 105 GT (HAN…
Full interior sound deadening kit to suit all left hand drive 105 GTs with hanging pedals. These kits have been precisely cut to shape to perfectly fit the contours of your GT. This also makes...
£450.00
IN341 FULL SOUND DEADENING KIT LHD 105 GT (STA…
Full interior sound deadening kit to suit all left hand drive 105 GTs with standing pedals. These kits have been precisely cut to shape to perfectly fit the contours of your GT. This also makes...
£450.00
EN400 GASKET PAPER SHEETS - SET OF 5
Set of 5 250mm square sheets of gasket material, 0.4mm thick. Ideal for making your own gaskets
£8.95
GB033 PROPSHAFT BOLT (9 mm)
Propshaft bolt - 13mm head and 9mm shank. Note that these bolts (8 required per car) are only suitable for later model cars with 9mm holes in the propshaft ends. Earlier cars use a slightly smaller...
£3.50
EN592 VALVE GUIDE 9/32" DIAMETER
Valve guide to fit performance valves with 9/32" diameter valve stems. Can be used on both inlet and exhaust valves.
£15.00